Ball Joints 01 TJ
#11
Guest
Posts: n/a
Re: Ball Joints 01 TJ
BFH=Big ------- Hammer
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
#12
Guest
Posts: n/a
Re: Ball Joints 01 TJ
BFH=Big ------- Hammer
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
#13
Guest
Posts: n/a
Re: Ball Joints 01 TJ
BFH=Big ------- Hammer
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
"Troy" <troy@ .> wrote in message
news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
>I read the site you linked, he turned his dana30 upside down and pressed
>them out with a BFH? not sure what that is, but mine's still connected to
>the jeep.
>
> The press kit I have has easily gotten the upper ones out, and pressed the
> new ones in... I even pulled it out again to get to the bottom easier.
>
> The way the bottom of the d30 is where the bottom of the ball joint won't
> allow me to get close with the larger pipe. I've been stuck at this part
> for 2 day now :(
>
> The 01 factory service manual says I need the special tool kit #6289.
>
> Can't find it anywhere. Where do I get the tools in the service manual?
>
>
#14
Guest
Posts: n/a
Re: Ball Joints 01 TJ
10 lb preferable....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
#15
Guest
Posts: n/a
Re: Ball Joints 01 TJ
10 lb preferable....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
#16
Guest
Posts: n/a
Re: Ball Joints 01 TJ
10 lb preferable....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
#17
Guest
Posts: n/a
Re: Ball Joints 01 TJ
10 lb preferable....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
David Rhodes wrote:
>
> BFH=Big ------- Hammer
> "Troy" <troy@ .> wrote in message
> news:k86dnYW_jNCepRjfRVn-2Q@comcast.com...
> >I read the site you linked, he turned his dana30 upside down and pressed
> >them out with a BFH? not sure what that is, but mine's still connected to
> >the jeep.
> >
> > The press kit I have has easily gotten the upper ones out, and pressed the
> > new ones in... I even pulled it out again to get to the bottom easier.
> >
> > The way the bottom of the d30 is where the bottom of the ball joint won't
> > allow me to get close with the larger pipe. I've been stuck at this part
> > for 2 day now :(
> >
> > The 01 factory service manual says I need the special tool kit #6289.
> >
> > Can't find it anywhere. Where do I get the tools in the service manual?
> >
> >
#18
Guest
Posts: n/a
Re: Ball Joints 01 TJ
That is a BMFH.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#19
Guest
Posts: n/a
Re: Ball Joints 01 TJ
That is a BMFH.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#20
Guest
Posts: n/a
Re: Ball Joints 01 TJ
That is a BMFH.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> 10 lb preferable....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's