Mike Romain

The rears are a light green.

Mike

Rusted wrote:
>
> the green with white stripe is common between the front and the dash, and
> not common to the rear signal correct?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4277CAFF.C3E5DEDD@sympatico.ca...
> > The wire in common is green with a white stripe.
> >
> > Mike
> >
> > Rusted wrote:
> >>
> >> My first guess, I replaced the front bulb already. No change.
> >>
> >> "Mike Romain" <romainm@sympatico.ca> wrote in message
> >> news:4277B05E.3FBF46A3@sympatico.ca...
> >> > Burned out bulb?
> >> >
> >> > Mike
> >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> > 88 Cherokee 235 BFG AT's
> >> >
> >> > Rusted wrote:
> >> >>
> >> >> Does this only happen to me?
> >> >> I have spend the past few nights with the jeep "studying" for the
> >> >> state
> >> >> safety and emissions test. The jeep is running great now, and I have
> >> >> taken
> >> >> care of a few odd things (like mud flaps, and the mirror that came off
> >> >> a
> >> >> while back). Last year the hazard light switch was flakey, but
> >> >> because
> >> >> of a
> >> >> fast tongue it passed. So last night I tear into the steering column
> >> >> and
> >> >> replace the turn signal / hazard switch, and walla all is well. Drove
> >> >> it
> >> >> around last night, and everything worked fine.
> >> >>
> >> >> Until this morning ON THE WAY to the inspection house I notice that my
> >> >> left
> >> >> turn signal indicator light on the dash is not working. What could
> >> >> be
> >> >> wrong. For some reason my front signal does not work now, the dash
> >> >> indicator does not work, but the rear signal does work. The entire
> >> >> right
> >> >> side works fine. What is wrong this time??? Is there anything
> >> >> common
> >> >> with
> >> >> the dash indicator and front signal, that is not common with the rear
> >> >> light?
> >> >>
> >> >> This is a 83 CJ7 Thanks for any ideas

Rusted

I plugged my old switch into the harness, and things worked. So I replaced
the "new" switch again, and so far so good. We will try for that all
illusive safety and emissions again in the morning. Mike, thanks for the
help with the color coded wires, it did help try to troubleshoot a bad
switch.


"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Rusted

I plugged my old switch into the harness, and things worked. So I replaced
the "new" switch again, and so far so good. We will try for that all
illusive safety and emissions again in the morning. Mike, thanks for the
help with the color coded wires, it did help try to troubleshoot a bad
switch.


"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Rusted

I plugged my old switch into the harness, and things worked. So I replaced
the "new" switch again, and so far so good. We will try for that all
illusive safety and emissions again in the morning. Mike, thanks for the
help with the color coded wires, it did help try to troubleshoot a bad
switch.


"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Rusted

I plugged my old switch into the harness, and things worked. So I replaced
the "new" switch again, and so far so good. We will try for that all
illusive safety and emissions again in the morning. Mike, thanks for the
help with the color coded wires, it did help try to troubleshoot a bad
switch.


"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Thom

No.
Me and a friend of mine went to the test (he '78 CJ7, me '81 CJ7) last
friday. Mine passed, his failed because of oil in the right rear drumbrake.
He fixed it and did a retest yesterday, where they tested the brakes and
did a quick runaround cause everything was fine friday. He passed.
Pulling out of the test station he discovered that NONE of the
turnsignals where working.

Thom.

"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Thom

No.
Me and a friend of mine went to the test (he '78 CJ7, me '81 CJ7) last
friday. Mine passed, his failed because of oil in the right rear drumbrake.
He fixed it and did a retest yesterday, where they tested the brakes and
did a quick runaround cause everything was fine friday. He passed.
Pulling out of the test station he discovered that NONE of the
turnsignals where working.

Thom.

"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Thom

No.
Me and a friend of mine went to the test (he '78 CJ7, me '81 CJ7) last
friday. Mine passed, his failed because of oil in the right rear drumbrake.
He fixed it and did a retest yesterday, where they tested the brakes and
did a quick runaround cause everything was fine friday. He passed.
Pulling out of the test station he discovered that NONE of the
turnsignals where working.

Thom.

"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Thom

No.
Me and a friend of mine went to the test (he '78 CJ7, me '81 CJ7) last
friday. Mine passed, his failed because of oil in the right rear drumbrake.
He fixed it and did a retest yesterday, where they tested the brakes and
did a quick runaround cause everything was fine friday. He passed.
Pulling out of the test station he discovered that NONE of the
turnsignals where working.

Thom.

"Rusted" <noEmail@please.com> wrote in message
news:xbOde.111$jp3.28@fe39.usenetserver.com...
> Does this only happen to me?
> I have spend the past few nights with the jeep "studying" for the state
> safety and emissions test. The jeep is running great now, and I have
> taken care of a few odd things (like mud flaps, and the mirror that came
> off a while back). Last year the hazard light switch was flakey, but
> because of a fast tongue it passed. So last night I tear into the
> steering column and replace the turn signal / hazard switch, and walla all
> is well. Drove it around last night, and everything worked fine.
>
> Until this morning ON THE WAY to the inspection house I notice that my
> left turn signal indicator light on the dash is not working. What could
> be wrong. For some reason my front signal does not work now, the dash
> indicator does not work, but the rear signal does work. The entire right
> side works fine. What is wrong this time??? Is there anything common
> with the dash indicator and front signal, that is not common with the rear
> light?
>
> This is a 83 CJ7 Thanks for any ideas
>
>
>
>
>

Steve Foley

The brakes had stopped the Jeep before the pedal hit the floor, so it really
wasn't bad at all. Just one of those "Oh Sh*&" moments.

The extortion station was 1/4 mile from my house, so I just drove home in
first gear.

"Rusted" <noEmail@please.com> wrote in message
news:sFRde.2194$f2.1937@fe62.usenetserver.com...
> That sounds worse than mine, I will take a bad blinker over brake loss any
> day.
>
> "Steve Foley" <steve.foley@DELETE.att.net> wrote in message
> news:xaPde.35$Ri.27@trnddc08...
> > You're not the only one.
> >
> > Three years ago I pulled into the extortion station. There was already a
> > car
> > inside being tested. They told me to back up against the fence. I backed
> > up
> > and pushed the brake pedal. The pedal went to the floor as a brake line
> > let
> > go.
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:xbOde.111$jp3.28@fe39.usenetserver.com...
> >> Does this only happen to me?
> >> I have spend the past few nights with the jeep "studying" for the
state
> >> safety and emissions test. The jeep is running great now, and I have
> > taken
> >> care of a few odd things (like mud flaps, and the mirror that came off
a
> >> while back). Last year the hazard light switch was flakey, but because
> >> of
> > a
> >> fast tongue it passed. So last night I tear into the steering column
> >> and
> >> replace the turn signal / hazard switch, and walla all is well. Drove
it
> >> around last night, and everything worked fine.
> >>
> >> Until this morning ON THE WAY to the inspection house I notice that my
> > left
> >> turn signal indicator light on the dash is not working. What could be
> >> wrong. For some reason my front signal does not work now, the dash
> >> indicator does not work, but the rear signal does work. The entire
right
> >> side works fine. What is wrong this time??? Is there anything common
> > with
> >> the dash indicator and front signal, that is not common with the rear
> > light?
> >>
> >> This is a 83 CJ7 Thanks for any ideas
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>
>