Axle Seal replacment 93 YJ
04-24-2004, 05:39 PM
#11
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
Oh ya, I forgot to say, 'really thick washers'....
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 05:39 PM
#12
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
Oh ya, I forgot to say, 'really thick washers'....
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 05:39 PM
#13
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
Oh ya, I forgot to say, 'really thick washers'....
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
Mike
"L.W.(ßill) ------ III" wrote:
>
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeepster wrote:
> >
> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> > replace the axle seal, from what I can gather the seal is located
> > inside the vac disconnect housing.
> >
> > Now to get the seal out I assume I have to make / buy a puller and
> > force the seal into the disconnect housing.... correct?
> >
> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:08 PM
#14
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
If a bit confused it shows in this picture that the seal popped into
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:08 PM
#15
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
If a bit confused it shows in this picture that the seal popped into
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:08 PM
#16
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
If a bit confused it shows in this picture that the seal popped into
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:08 PM
#17
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
If a bit confused it shows in this picture that the seal popped into
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
the vac disconnect housing.... do I pull the seal out through the tube
or push it inward toward the diff?
I got a peice of ready rod and 4 thick washers and I should be able to
make what I need here with a bit of help from the trusty bench grinder
and various other crap laying around.
On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Oh ya, I forgot to say, 'really thick washers'....
>
>Mike
>
>"L.W.(ßill) ------ III" wrote:
>>
>> http://www.madxj.com/MADXJ/technical...97andSeals.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Jeepster wrote:
>> >
>> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
>> > replace the axle seal, from what I can gather the seal is located
>> > inside the vac disconnect housing.
>> >
>> > Now to get the seal out I assume I have to make / buy a puller and
>> > force the seal into the disconnect housing.... correct?
>> >
>> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:31 PM
#18
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
The seal pops into the housing and the new one gets sucked back out the
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:31 PM
#19
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
The seal pops into the housing and the new one gets sucked back out the
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
04-24-2004, 06:31 PM
#20
Guest
Posts: n/a
Re: Axle Seal replacment 93 YJ
The seal pops into the housing and the new one gets sucked back out the
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
tube.
Mike
Jeepster wrote:
>
> If a bit confused it shows in this picture that the seal popped into
> the vac disconnect housing.... do I pull the seal out through the tube
> or push it inward toward the diff?
>
> I got a peice of ready rod and 4 thick washers and I should be able to
> make what I need here with a bit of help from the trusty bench grinder
> and various other crap laying around.
>
> On Sat, 24 Apr 2004 17:39:08 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Oh ya, I forgot to say, 'really thick washers'....
> >
> >Mike
> >
> >"L.W.(ßill) ------ III" wrote:
> >>
> >> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> >> God Bless America, ßill O|||||||O
> >> mailto:-------------------- http://www.----------.com/
> >>
> >> Jeepster wrote:
> >> >
> >> > I just pulled the axle on my sons 93 YJ (passenger side) and I need to
> >> > replace the axle seal, from what I can gather the seal is located
> >> > inside the vac disconnect housing.
> >> >
> >> > Now to get the seal out I assume I have to make / buy a puller and
> >> > force the seal into the disconnect housing.... correct?
> >> >
> >> > Also is it possible to pry it out or is this a bad idea?
