AMC V8 rear main seal
#11
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Your bearings could be worn causing the crank to drop and therefore causing
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
#12
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Your bearings could be worn causing the crank to drop and therefore causing
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
#13
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Your bearings could be worn causing the crank to drop and therefore causing
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
the rear seal to leak. I'm diagnosing the same problem in mine right now.
--
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1112708848.042044.216260@g14g2000cwa.googlegr oups.com...
> Hey Everyone,
> After i finahlly got the last project done, i fired up the '82
> Scrambler to get it out of the garage. Now the 360's rear main seal
> that was a slow leak turned into a gusher. So last night i dropped the
> starter, oil pan and bearing cap. Replaced the thing and had oil back
> in it in under two hours. Refill with oil.... still leaks. Not as
> bad, but still pisses me off! What am i doing wrong? I coated both
> halves with oil, the rest seems pretty no-brainer. I'm covered there
> ;) It's definately the seal, not the pan. I took off the access cover
> to the Torqflight 727, and it's dripping inside the plate, not down the
> front outside (if that makes any sense).
>
> Thanks,
> Don W
>
Thread
Thread Starter
Forum
Replies
Last Post
alexmacpherson@rogers.com
Jeep Mailing List
6
03-17-2007 12:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)