Dan Hoskin

Hi,
I finally got my 90 YJ home. The guy I bought it from said that it is
running really rough because of the carberetor needing some serious therapy,
so it wound up binking out on me not to far from his place. The choke was
closed tight, so I tied it open to get home and it ran smooth as can be.
Now that I have had a few hours to look at it there are naturally a few
questions. :)

1- What causes the air filter body to have about 3/16" of oily goo in the
bottom of it?
2- With the air filter cover off, there is a 'puffing' of smoke coming up
through the hose in the bottom of the air filter body. It may just be
because it was -15 c today, should I be concerned?
3- Does anybody know where to get used parts in Ontario, Canada? My hood has
a 'wrinkle' in it and I am looking for a replacement. Some other bits to.

If the sun every comes out here I am going to drop a new set of plugs in and
dig a bit deeper into it's overall health..... So far, so good though. It
has some rust, like the windshield frame (of course). I am thinking of going
to fiberglass replacement panels from someone like Quadratec, are there any
other manufacturers of replacement panels?

The frame is clean and solid and I was looking at the fiberglass bodies from
Quadratec and was thinking it would be nice to have that clean a start for
my Jeep project. Has anybody here done a full body replacement? Does anyone
else make a good fiberglass body? Can I still use my factory hardtop with
them?

Well, I think that is more than enough questions for now, thanks for all the
help.

Dan Hoskin

PS: I just ordered a windshield decal that is printed upside-down: "IF
YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......

Scott in Baltimore

> PS: I just ordered a windshield decal that is printed upside-down: "IF
> YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......

How do you know they didn't print it right side up and stuff it in the
envelope upside-down? <VBG>

I think the goo is condensed blow-by. There is a thread that covers
that subject in the past 24 hours. Sort by date and read backwards.
(not upside-down)

Scott in Baltimore

> PS: I just ordered a windshield decal that is printed upside-down: "IF
> YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......

How do you know they didn't print it right side up and stuff it in the
envelope upside-down? <VBG>

I think the goo is condensed blow-by. There is a thread that covers
that subject in the past 24 hours. Sort by date and read backwards.
(not upside-down)

Scott in Baltimore

> PS: I just ordered a windshield decal that is printed upside-down: "IF
> YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......

How do you know they didn't print it right side up and stuff it in the
envelope upside-down? <VBG>

I think the goo is condensed blow-by. There is a thread that covers
that subject in the past 24 hours. Sort by date and read backwards.
(not upside-down)

Scott in Baltimore

> PS: I just ordered a windshield decal that is printed upside-down: "IF
> YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......

How do you know they didn't print it right side up and stuff it in the
envelope upside-down? <VBG>

I think the goo is condensed blow-by. There is a thread that covers
that subject in the past 24 hours. Sort by date and read backwards.
(not upside-down)

Joe C

Part of the problem could have to do with your
pulse-air system. There are two valves used for
anti-pollution, connected under the air cleaner.
When they go defective, all kinds of good stuff
runs into the air cleaner body. Here is a great
website to tell you all about the system.
http://home.sprynet.com/~dale02/list.htm

Joe

> 1- What causes the air filter body to have about 3/16" of oily goo in the
> bottom of it?
> 2- With the air filter cover off, there is a 'puffing' of smoke coming up
> through the hose in the bottom of the air filter body. It may just be
> because it was -15 c today, should I be concerned?

Joe C

Part of the problem could have to do with your
pulse-air system. There are two valves used for
anti-pollution, connected under the air cleaner.
When they go defective, all kinds of good stuff
runs into the air cleaner body. Here is a great
website to tell you all about the system.
http://home.sprynet.com/~dale02/list.htm

Joe

> 1- What causes the air filter body to have about 3/16" of oily goo in the
> bottom of it?
> 2- With the air filter cover off, there is a 'puffing' of smoke coming up
> through the hose in the bottom of the air filter body. It may just be
> because it was -15 c today, should I be concerned?

Joe C

Part of the problem could have to do with your
pulse-air system. There are two valves used for
anti-pollution, connected under the air cleaner.
When they go defective, all kinds of good stuff
runs into the air cleaner body. Here is a great
website to tell you all about the system.
http://home.sprynet.com/~dale02/list.htm

Joe

> 1- What causes the air filter body to have about 3/16" of oily goo in the
> bottom of it?
> 2- With the air filter cover off, there is a 'puffing' of smoke coming up
> through the hose in the bottom of the air filter body. It may just be
> because it was -15 c today, should I be concerned?

Joe C

Part of the problem could have to do with your
pulse-air system. There are two valves used for
anti-pollution, connected under the air cleaner.
When they go defective, all kinds of good stuff
runs into the air cleaner body. Here is a great
website to tell you all about the system.
http://home.sprynet.com/~dale02/list.htm

Joe

> 1- What causes the air filter body to have about 3/16" of oily goo in the
> bottom of it?
> 2- With the air filter cover off, there is a 'puffing' of smoke coming up
> through the hose in the bottom of the air filter body. It may just be
> because it was -15 c today, should I be concerned?

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Hi Dan,
Put a kit in your carburetor, and replace the choke pull-off number
forty at: http://www.carburetorfactory.com/expvw03.html
Clean the orifice at your intake manifold near the carburetor base
throttle plate:
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Read through: http://home.sprynet.com/~dale02/list.htm for other things
to check.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dan Hoskin wrote:
>
> Hi,
> I finally got my 90 YJ home. The guy I bought it from said that it is
> running really rough because of the carberetor needing some serious therapy,
> so it wound up binking out on me not to far from his place. The choke was
> closed tight, so I tied it open to get home and it ran smooth as can be.
> Now that I have had a few hours to look at it there are naturally a few
> questions. :)
>
> 1- What causes the air filter body to have about 3/16" of oily goo in the
> bottom of it?
> 2- With the air filter cover off, there is a 'puffing' of smoke coming up
> through the hose in the bottom of the air filter body. It may just be
> because it was -15 c today, should I be concerned?
> 3- Does anybody know where to get used parts in Ontario, Canada? My hood has
> a 'wrinkle' in it and I am looking for a replacement. Some other bits to.
>
> If the sun every comes out here I am going to drop a new set of plugs in and
> dig a bit deeper into it's overall health..... So far, so good though. It
> has some rust, like the windshield frame (of course). I am thinking of going
> to fiberglass replacement panels from someone like Quadratec, are there any
> other manufacturers of replacement panels?
>
> The frame is clean and solid and I was looking at the fiberglass bodies from
> Quadratec and was thinking it would be nice to have that clean a start for
> my Jeep project. Has anybody here done a full body replacement? Does anyone
> else make a good fiberglass body? Can I still use my factory hardtop with
> them?
>
> Well, I think that is more than enough questions for now, thanks for all the
> help.
>
> Dan Hoskin
>
> PS: I just ordered a windshield decal that is printed upside-down: "IF
> YOU CAN READ THIS, ROLL ME BACK OVER." I had to have it.......