It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know of
an aftermarket camshaft that might give this engine a few more horsepower?

Thanks

 

I don't think you'll find anyone with a performance cam for it,
it's already developing a horse power per cubic inch. If what you really
asking is where to buy a cam because you've got a flat lobe, then try:
http://www.quadratec.com/cgi-bin/sgi...04012615331210
Remember there's no substitute for cubic inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

chevtruck wrote:
>
> It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know of
> an aftermarket camshaft that might give this engine a few more horsepower?
>
> Thanks

 

I don't think you'll find anyone with a performance cam for it,
it's already developing a horse power per cubic inch. If what you really
asking is where to buy a cam because you've got a flat lobe, then try:
http://www.quadratec.com/cgi-bin/sgi...04012615331210
Remember there's no substitute for cubic inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

chevtruck wrote:
>
> It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know of
> an aftermarket camshaft that might give this engine a few more horsepower?
>
> Thanks

 

I don't think you'll find anyone with a performance cam for it,
it's already developing a horse power per cubic inch. If what you really
asking is where to buy a cam because you've got a flat lobe, then try:
http://www.quadratec.com/cgi-bin/sgi...04012615331210
Remember there's no substitute for cubic inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

chevtruck wrote:
>
> It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know of
> an aftermarket camshaft that might give this engine a few more horsepower?
>
> Thanks

 

I have been wondering for a long time, and maybe you know the answer, Bill,
whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
around for such a long time. With AMC's tendency to borrow parts from other
manufacturers, it wouldn't surprise me if it is, and if so, there are
numerous performance cam companies that make shafts for the 151.

Jerry


"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40157DD2.1051CB85@***.net...
> I don't think you'll find anyone with a performance cam for it,
> it's already developing a horse power per cubic inch. If what you really
> asking is where to buy a cam because you've got a flat lobe, then try:
>
http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
EQC=3&UREQD=4&FNM=00&UID=2004012615331210
> Remember there's no substitute for cubic inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> chevtruck wrote:
> >
> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
of
> > an aftermarket camshaft that might give this engine a few more
horsepower?
> >
> > Thanks

 

I have been wondering for a long time, and maybe you know the answer, Bill,
whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
around for such a long time. With AMC's tendency to borrow parts from other
manufacturers, it wouldn't surprise me if it is, and if so, there are
numerous performance cam companies that make shafts for the 151.

Jerry


"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40157DD2.1051CB85@***.net...
> I don't think you'll find anyone with a performance cam for it,
> it's already developing a horse power per cubic inch. If what you really
> asking is where to buy a cam because you've got a flat lobe, then try:
>
http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
EQC=3&UREQD=4&FNM=00&UID=2004012615331210
> Remember there's no substitute for cubic inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> chevtruck wrote:
> >
> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
of
> > an aftermarket camshaft that might give this engine a few more
horsepower?
> >
> > Thanks

 

I have been wondering for a long time, and maybe you know the answer, Bill,
whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
around for such a long time. With AMC's tendency to borrow parts from other
manufacturers, it wouldn't surprise me if it is, and if so, there are
numerous performance cam companies that make shafts for the 151.

Jerry


"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40157DD2.1051CB85@***.net...
> I don't think you'll find anyone with a performance cam for it,
> it's already developing a horse power per cubic inch. If what you really
> asking is where to buy a cam because you've got a flat lobe, then try:
>
http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
EQC=3&UREQD=4&FNM=00&UID=2004012615331210
> Remember there's no substitute for cubic inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> chevtruck wrote:
> >
> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
of
> > an aftermarket camshaft that might give this engine a few more
horsepower?
> >
> > Thanks

 

Nope: http://www.off-road.com/jeep/tech/engine/gm151.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Jerry Newton wrote:
>
> I have been wondering for a long time, and maybe you know the answer, Bill,
> whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
> around for such a long time. With AMC's tendency to borrow parts from other
> manufacturers, it wouldn't surprise me if it is, and if so, there are
> numerous performance cam companies that make shafts for the 151.
>
> Jerry

 

Nope: http://www.off-road.com/jeep/tech/engine/gm151.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Jerry Newton wrote:
>
> I have been wondering for a long time, and maybe you know the answer, Bill,
> whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
> around for such a long time. With AMC's tendency to borrow parts from other
> manufacturers, it wouldn't surprise me if it is, and if so, there are
> numerous performance cam companies that make shafts for the 151.
>
> Jerry

 

Nope: http://www.off-road.com/jeep/tech/engine/gm151.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Jerry Newton wrote:
>
> I have been wondering for a long time, and maybe you know the answer, Bill,
> whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
> around for such a long time. With AMC's tendency to borrow parts from other
> manufacturers, it wouldn't surprise me if it is, and if so, there are
> numerous performance cam companies that make shafts for the 151.
>
> Jerry