Aftermarket camshaft
#11
Guest
Posts: n/a
Re: Aftermarket camshaft
Your time, date imprint is wrong. Double click on your time and
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
#12
Guest
Posts: n/a
Re: Aftermarket camshaft
Your time, date imprint is wrong. Double click on your time and
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
#13
Guest
Posts: n/a
Re: Aftermarket camshaft
Your time, date imprint is wrong. Double click on your time and
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
arrow in the correct time zone. Eastern?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
> design.
#14
Guest
Posts: n/a
Re: Aftermarket camshaft
Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
#15
Guest
Posts: n/a
Re: Aftermarket camshaft
Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
#16
Guest
Posts: n/a
Re: Aftermarket camshaft
Jeeps did use a version of the Iron Duke long ago, but the current 2.5 is an AMC
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
design.
In message <4015bd5d_2@newspeer2.tds.net>, "Jerry Newton" wrote:
>I have been wondering for a long time, and maybe you know the answer, Bill,
>whether the Jeep 2.5 is the same as the GM 2.5 "Iron Duke" that has been
>around for such a long time. With AMC's tendency to borrow parts from other
>manufacturers, it wouldn't surprise me if it is, and if so, there are
>numerous performance cam companies that make shafts for the 151.
>
>Jerry
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40157DD2.1051CB85@***.net...
>> I don't think you'll find anyone with a performance cam for it,
>> it's already developing a horse power per cubic inch. If what you really
>> asking is where to buy a cam because you've got a flat lobe, then try:
>>
>http://www.quadratec.com/cgi-bin/sgi...A=1&UREQB=2&UR
>EQC=3&UREQD=4&FNM=00&UID=2004012615331210
>> Remember there's no substitute for cubic inches.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> chevtruck wrote:
>> >
>> > It's time to rebuild the 2.5L in my daughter's 1993 YJ. Does anyone know
>of
>> > an aftermarket camshaft that might give this engine a few more
>horsepower?
>> >
>> > Thanks
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)