Advice sought on T-Case crawl ratio choices
01-05-2004, 06:06 PM
#1
Guest
Posts: n/a
Advice sought on T-Case crawl ratio choices
After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
you set up with the 4 to 1?"), I have done some research and
confirmed that just sizing up the gears in the diffs is not enough to
really crawl in control, when equipped with a stock NP 231 T-
case in my 94 YJ. (Yes, I checked out all the online gear ratio
calculators.)
So my options as researched so far are:
Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
or street driving. A reasonable $1200 outlay. Bolt-in install in the
exact same space as the NP231 case, so no driveshaft mods needed.
Compatible with TeraLow's 2WD Low option (which might help crawling
and turning at the same time).
Cons: Uses the drive chain, not helical cut gears like an Atlas or
Dana 300 Tcase. (But can opt for a JB conversions wide chain
replacement). I also have been into my t-case twice already and
don't find it a real enjoyable process.
Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
ratio. Cast iron heavy duty housing. Mid-Range price on parts.
Cons: More labor inten$ive to clock, adjust, fit. Would require
driveshaft lenghtening or shortening.
Atlas II. Pros: All geared, great reputation. New and shiny.
Cons: Pricey at $2,500 for parts, and still another laborious install
and fitment.
What to do? Any other options or opinions?
Cal Wheeler
'94 YJ EFI IL 6
Dynatrac ProRock 60 Rear w/ ARB
Dynatrac 44 Front w/ ARB
5.13 gears
37 Super Swampers
See my rig in action at Calico:
http://makeashorterlink.com/?R14C227F6
http://makeashorterlink.com/?C63C127F6
(Ofoto site that requires a login to view, but that login can be bogus)
in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
you set up with the 4 to 1?"), I have done some research and
confirmed that just sizing up the gears in the diffs is not enough to
really crawl in control, when equipped with a stock NP 231 T-
case in my 94 YJ. (Yes, I checked out all the online gear ratio
calculators.)
So my options as researched so far are:
Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
or street driving. A reasonable $1200 outlay. Bolt-in install in the
exact same space as the NP231 case, so no driveshaft mods needed.
Compatible with TeraLow's 2WD Low option (which might help crawling
and turning at the same time).
Cons: Uses the drive chain, not helical cut gears like an Atlas or
Dana 300 Tcase. (But can opt for a JB conversions wide chain
replacement). I also have been into my t-case twice already and
don't find it a real enjoyable process.
Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
ratio. Cast iron heavy duty housing. Mid-Range price on parts.
Cons: More labor inten$ive to clock, adjust, fit. Would require
driveshaft lenghtening or shortening.
Atlas II. Pros: All geared, great reputation. New and shiny.
Cons: Pricey at $2,500 for parts, and still another laborious install
and fitment.
What to do? Any other options or opinions?
Cal Wheeler
'94 YJ EFI IL 6
Dynatrac ProRock 60 Rear w/ ARB
Dynatrac 44 Front w/ ARB
5.13 gears
37 Super Swampers
See my rig in action at Calico:
http://makeashorterlink.com/?R14C227F6
http://makeashorterlink.com/?C63C127F6
(Ofoto site that requires a login to view, but that login can be bogus)
01-05-2004, 06:34 PM
#2
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
With what you have already in your rig what's another $2,500? You didn't
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
01-05-2004, 06:34 PM
#3
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
With what you have already in your rig what's another $2,500? You didn't
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
01-05-2004, 06:34 PM
#4
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
With what you have already in your rig what's another $2,500? You didn't
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
skimp on the axles... don't skimp here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cal Wheeler" <cal@whee.ler> wrote in message
news:btcql9$3r4$0@pita.alt.net...
> After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
> in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
> you set up with the 4 to 1?"), I have done some research and
> confirmed that just sizing up the gears in the diffs is not enough to
> really crawl in control, when equipped with a stock NP 231 T-
> case in my 94 YJ. (Yes, I checked out all the online gear ratio
> calculators.)
>
> So my options as researched so far are:
>
> Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
> or street driving. A reasonable $1200 outlay. Bolt-in install in the
> exact same space as the NP231 case, so no driveshaft mods needed.
> Compatible with TeraLow's 2WD Low option (which might help crawling
> and turning at the same time).
>
> Cons: Uses the drive chain, not helical cut gears like an Atlas or
> Dana 300 Tcase. (But can opt for a JB conversions wide chain
> replacement). I also have been into my t-case twice already and
> don't find it a real enjoyable process.
>
> Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
> ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>
> Cons: More labor inten$ive to clock, adjust, fit. Would require
> driveshaft lenghtening or shortening.
>
> Atlas II. Pros: All geared, great reputation. New and shiny.
>
> Cons: Pricey at $2,500 for parts, and still another laborious install
> and fitment.
>
>
> What to do? Any other options or opinions?
>
> Cal Wheeler
>
> '94 YJ EFI IL 6
> Dynatrac ProRock 60 Rear w/ ARB
> Dynatrac 44 Front w/ ARB
> 5.13 gears
> 37 Super Swampers
>
> See my rig in action at Calico:
>
> http://makeashorterlink.com/?R14C227F6
> http://makeashorterlink.com/?C63C127F6
>
> (Ofoto site that requires a login to view, but that login can be bogus)
>
01-05-2004, 06:51 PM
#5
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
JimG wrote:
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
01-05-2004, 06:51 PM
#6
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
JimG wrote:
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
01-05-2004, 06:51 PM
#7
Guest
Posts: n/a
Re: Advice sought on T-Case crawl ratio choices
JimG wrote:
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
> With what you have already in your rig what's another $2,500?
TWO TeraLow Case upgrades...(one as a spare!)...125 Table dances...a
good portion of a kitchen remodel...$6,000 by the time I'm through
paying the interest charges on my credit card...;-)
> You didn't
> skimp on the axles... don't skimp here.
The money flows out when I've got a nice inflow. Right now, the pipes
are a little constricted.
Sonmetime I wish I'd picked a less expensive hobby. Hello. My name's Cal
and I am a Jeepaholic.
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:btcql9$3r4$0@pita.alt.net...
>
>>After a recent stall 'n' lurch extravaganza up the Doran Loop obstacles
>>in Calico, CA , and a couple of key words uttered by fellow Jeeper ("Are
>>you set up with the 4 to 1?"), I have done some research and
>>confirmed that just sizing up the gears in the diffs is not enough to
>>really crawl in control, when equipped with a stock NP 231 T-
>>case in my 94 YJ. (Yes, I checked out all the online gear ratio
>>calculators.)
>>
>>So my options as researched so far are:
>>
>>Get a TeraLow 4.0:1 kit. Pros: Doesn't mess with 2wd or 4WD Hi
>>or street driving. A reasonable $1200 outlay. Bolt-in install in the
>>exact same space as the NP231 case, so no driveshaft mods needed.
>>Compatible with TeraLow's 2WD Low option (which might help crawling
>>and turning at the same time).
>>
>>Cons: Uses the drive chain, not helical cut gears like an Atlas or
>>Dana 300 Tcase. (But can opt for a JB conversions wide chain
>>replacement). I also have been into my t-case twice already and
>>don't find it a real enjoyable process.
>>
>>Dana 300 T-Case. Pros: Small size, all gear internal, great crawl
>>ratio. Cast iron heavy duty housing. Mid-Range price on parts.
>>
>>Cons: More labor inten$ive to clock, adjust, fit. Would require
>>driveshaft lenghtening or shortening.
>>
>>Atlas II. Pros: All geared, great reputation. New and shiny.
>>
>>Cons: Pricey at $2,500 for parts, and still another laborious install
>>and fitment.
>>
>>
>>What to do? Any other options or opinions?
>>
>>Cal Wheeler
>>
>>'94 YJ EFI IL 6
>>Dynatrac ProRock 60 Rear w/ ARB
>>Dynatrac 44 Front w/ ARB
>>5.13 gears
>>37 Super Swampers
>>
>>See my rig in action at Calico:
>>
>>http://makeashorterlink.com/?R14C227F6
>>http://makeashorterlink.com/?C63C127F6
>>
>>(Ofoto site that requires a login to view, but that login can be bogus)
>>
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
