98 TJ header cracked
04-03-2004, 01:14 PM
#41
Guest
Posts: n/a
Re: 98 TJ header cracked
OH...you guys did it yerself?
I thought this stuff had to be "sprayed" on like a stucco type deal....
Or did you guys just rent a sprayer and go at 'er!
What's the R rating on that stuff....more/less quiet?
"Shamus in CO" <askme@nospam.com> wrote in message
news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> The herculiner wasn't *that* bad to do. The only thing left in the tub
was
> the dash. He bought the kit that comes with everything you need for $100,
I
> believe.
>
> Shamus in CO
>
> "SB" <chicbears@hotmail.com> wrote in message
> news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > Other will give you more info...but headers seem to be one of those
things
> > that is "expected" to go!
> >
> > How much of a pain was the herculiner. Gotta pretty well take
EVERYTHING
> > out eh?!
> > Cost?
> >
> >
> > "Shamus in CO" <askme@nospam.com> wrote in message
> > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > mentioned
> > > he thought he had an exhaust leak, so I took a look. Did he ever!
The
> > > headers are cracked all the way around on one of the tubes right where
> the
> > > final two go into one. Is this a 'normal' occurrence? Should we look
> for
> > a
> > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> with
> > > this? Obviously, the header has to be replaced, any suggestions?
> What's
> > it
> > > going run him? Don't think we're going take this one on in the
> backyard.
> > >
> > > TIA,
> > > Shamus in CO
> > > Reply to group, execrable spammers!
> > >
> > > BTW We HercuLined the entire inside of the tub. Man, that stuff makes
> it
> > > look bad a$$!
> > >
> > >
> >
> >
>
>
I thought this stuff had to be "sprayed" on like a stucco type deal....
Or did you guys just rent a sprayer and go at 'er!
What's the R rating on that stuff....more/less quiet?
"Shamus in CO" <askme@nospam.com> wrote in message
news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> The herculiner wasn't *that* bad to do. The only thing left in the tub
was
> the dash. He bought the kit that comes with everything you need for $100,
I
> believe.
>
> Shamus in CO
>
> "SB" <chicbears@hotmail.com> wrote in message
> news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > Other will give you more info...but headers seem to be one of those
things
> > that is "expected" to go!
> >
> > How much of a pain was the herculiner. Gotta pretty well take
EVERYTHING
> > out eh?!
> > Cost?
> >
> >
> > "Shamus in CO" <askme@nospam.com> wrote in message
> > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > mentioned
> > > he thought he had an exhaust leak, so I took a look. Did he ever!
The
> > > headers are cracked all the way around on one of the tubes right where
> the
> > > final two go into one. Is this a 'normal' occurrence? Should we look
> for
> > a
> > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> with
> > > this? Obviously, the header has to be replaced, any suggestions?
> What's
> > it
> > > going run him? Don't think we're going take this one on in the
> backyard.
> > >
> > > TIA,
> > > Shamus in CO
> > > Reply to group, execrable spammers!
> > >
> > > BTW We HercuLined the entire inside of the tub. Man, that stuff makes
> it
> > > look bad a$$!
> > >
> > >
> >
> >
>
>
04-03-2004, 04:05 PM
#42
Guest
Posts: n/a
Re: 98 TJ header cracked
No, we got the paint on stuff. The kit came with rollers and a brush.
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
04-03-2004, 04:05 PM
#43
Guest
Posts: n/a
Re: 98 TJ header cracked
No, we got the paint on stuff. The kit came with rollers and a brush.
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
04-03-2004, 04:05 PM
#44
Guest
Posts: n/a
Re: 98 TJ header cracked
No, we got the paint on stuff. The kit came with rollers and a brush.
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
04-03-2004, 04:05 PM
#45
Guest
Posts: n/a
Re: 98 TJ header cracked
No, we got the paint on stuff. The kit came with rollers and a brush.
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Quieted things down a bit too, granted, the carpet was out last time we went
wheeling.
Shamus
"SB" <chicbears@hotmail.com> wrote in message
news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> OH...you guys did it yerself?
> I thought this stuff had to be "sprayed" on like a stucco type deal....
>
> Or did you guys just rent a sprayer and go at 'er!
>
> What's the R rating on that stuff....more/less quiet?
>
> "Shamus in CO" <askme@nospam.com> wrote in message
> news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > The herculiner wasn't *that* bad to do. The only thing left in the tub
> was
> > the dash. He bought the kit that comes with everything you need for
$100,
> I
> > believe.
> >
> > Shamus in CO
> >
> > "SB" <chicbears@hotmail.com> wrote in message
> > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > Other will give you more info...but headers seem to be one of those
> things
> > > that is "expected" to go!
> > >
> > > How much of a pain was the herculiner. Gotta pretty well take
> EVERYTHING
> > > out eh?!
> > > Cost?
> > >
> > >
> > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > mentioned
> > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> The
> > > > headers are cracked all the way around on one of the tubes right
where
> > the
> > > > final two go into one. Is this a 'normal' occurrence? Should we
look
> > for
> > > a
> > > > sinister cause, i.e. bad motor mounts or the like? Has anyone dealt
> > with
> > > > this? Obviously, the header has to be replaced, any suggestions?
> > What's
> > > it
> > > > going run him? Don't think we're going take this one on in the
> > backyard.
> > > >
> > > > TIA,
> > > > Shamus in CO
> > > > Reply to group, execrable spammers!
> > > >
> > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
makes
> > it
> > > > look bad a$$!
> > > >
> > > >
> > >
> > >
> >
> >
>
>
04-03-2004, 04:18 PM
#46
Guest
Posts: n/a
Re: 98 TJ header cracked
I have a Banks header on the way from 4x4groupbuy.com for $395 shipped.
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
04-03-2004, 04:18 PM
#47
Guest
Posts: n/a
Re: 98 TJ header cracked
I have a Banks header on the way from 4x4groupbuy.com for $395 shipped.
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
04-03-2004, 04:18 PM
#48
Guest
Posts: n/a
Re: 98 TJ header cracked
I have a Banks header on the way from 4x4groupbuy.com for $395 shipped.
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
04-03-2004, 04:18 PM
#49
Guest
Posts: n/a
Re: 98 TJ header cracked
I have a Banks header on the way from 4x4groupbuy.com for $395 shipped.
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
4wd.com wants $399 for it +shipping and/or tax. Sounds about right on the
factory price but they will dicker a little bit just not enough. Call Jason
or Justin at 4x4 group buy for the best price.
I opted for the Banks vs. the Borla since I have a very early model '97
(made like 5/96 i think) so the Borla would have required cutting/welding
that is beyond my skills and availiable tools. The Banks should be a
bolt-on replacement.
Oh, and the cat-back stinger system is $265+ $30 shipping from 4x4 GB too.
Shawn
<COLLIDE13@webtv.net> wrote in message
news:11426-406E7CD7-15@storefull-3138.bay.webtv.net...
> How much does a Borla header run,about?
> I happened to have called the Banks 800 number,today.They want $450.00
> for their stainless header.('02 Wrangler)....$300 for the cat-back.
> Anyone know where to find them cheapest? Thanks,Hank.
>
04-03-2004, 05:12 PM
#50
Guest
Posts: n/a
Re: 98 TJ header cracked
I know I could look this up on their site...
How thick is it? Multiple coats required?
"Shamus in CO" <askme@nospam.com> wrote in message
news:rZGdncH1qLW5uvLdRVn_iw@comcast.com...
> No, we got the paint on stuff. The kit came with rollers and a brush.
> Quieted things down a bit too, granted, the carpet was out last time we
went
> wheeling.
>
> Shamus
>
> "SB" <chicbears@hotmail.com> wrote in message
> news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> > OH...you guys did it yerself?
> > I thought this stuff had to be "sprayed" on like a stucco type deal....
> >
> > Or did you guys just rent a sprayer and go at 'er!
> >
> > What's the R rating on that stuff....more/less quiet?
> >
> > "Shamus in CO" <askme@nospam.com> wrote in message
> > news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > > The herculiner wasn't *that* bad to do. The only thing left in the
tub
> > was
> > > the dash. He bought the kit that comes with everything you need for
> $100,
> > I
> > > believe.
> > >
> > > Shamus in CO
> > >
> > > "SB" <chicbears@hotmail.com> wrote in message
> > > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > > Other will give you more info...but headers seem to be one of those
> > things
> > > > that is "expected" to go!
> > > >
> > > > How much of a pain was the herculiner. Gotta pretty well take
> > EVERYTHING
> > > > out eh?!
> > > > Cost?
> > > >
> > > >
> > > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > > mentioned
> > > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> > The
> > > > > headers are cracked all the way around on one of the tubes right
> where
> > > the
> > > > > final two go into one. Is this a 'normal' occurrence? Should we
> look
> > > for
> > > > a
> > > > > sinister cause, i.e. bad motor mounts or the like? Has anyone
dealt
> > > with
> > > > > this? Obviously, the header has to be replaced, any suggestions?
> > > What's
> > > > it
> > > > > going run him? Don't think we're going take this one on in the
> > > backyard.
> > > > >
> > > > > TIA,
> > > > > Shamus in CO
> > > > > Reply to group, execrable spammers!
> > > > >
> > > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
> makes
> > > it
> > > > > look bad a$$!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
How thick is it? Multiple coats required?
"Shamus in CO" <askme@nospam.com> wrote in message
news:rZGdncH1qLW5uvLdRVn_iw@comcast.com...
> No, we got the paint on stuff. The kit came with rollers and a brush.
> Quieted things down a bit too, granted, the carpet was out last time we
went
> wheeling.
>
> Shamus
>
> "SB" <chicbears@hotmail.com> wrote in message
> news:I9Dbc.20645$jVF.5741@news04.bloor.is.net.cabl e.rogers.com...
> > OH...you guys did it yerself?
> > I thought this stuff had to be "sprayed" on like a stucco type deal....
> >
> > Or did you guys just rent a sprayer and go at 'er!
> >
> > What's the R rating on that stuff....more/less quiet?
> >
> > "Shamus in CO" <askme@nospam.com> wrote in message
> > news:yqKdnXGTBqJcZPPdRVn-hw@comcast.com...
> > > The herculiner wasn't *that* bad to do. The only thing left in the
tub
> > was
> > > the dash. He bought the kit that comes with everything you need for
> $100,
> > I
> > > believe.
> > >
> > > Shamus in CO
> > >
> > > "SB" <chicbears@hotmail.com> wrote in message
> > > news:oOnbc.3900$RfJ.3311@twister01.bloor.is.net.ca ble.rogers.com...
> > > > Other will give you more info...but headers seem to be one of those
> > things
> > > > that is "expected" to go!
> > > >
> > > > How much of a pain was the herculiner. Gotta pretty well take
> > EVERYTHING
> > > > out eh?!
> > > > Cost?
> > > >
> > > >
> > > > "Shamus in CO" <askme@nospam.com> wrote in message
> > > > news:e6-dnRCAJdJdn_PdRVn-sQ@comcast.com...
> > > > > Helped a bud yesterday get his 98 TJ 4.0 ready for the season. He
> > > > mentioned
> > > > > he thought he had an exhaust leak, so I took a look. Did he ever!
> > The
> > > > > headers are cracked all the way around on one of the tubes right
> where
> > > the
> > > > > final two go into one. Is this a 'normal' occurrence? Should we
> look
> > > for
> > > > a
> > > > > sinister cause, i.e. bad motor mounts or the like? Has anyone
dealt
> > > with
> > > > > this? Obviously, the header has to be replaced, any suggestions?
> > > What's
> > > > it
> > > > > going run him? Don't think we're going take this one on in the
> > > backyard.
> > > > >
> > > > > TIA,
> > > > > Shamus in CO
> > > > > Reply to group, execrable spammers!
> > > > >
> > > > > BTW We HercuLined the entire inside of the tub. Man, that stuff
> makes
> > > it
> > > > > look bad a$$!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>