I would recommend you just clean the plugs and sockets for both the
crank and cam sensors with a spray contact cleaner. Even WD40 will work
to see if it is just a bad connection.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

msgrace wrote:
>
> I have a new crankshaft position sensor on order from the Jeep dealer ship
> because the truck is now with the check engine light on and coding 11 for
> no crank reference signal detected during engine cranking; intermittent
> loss of either camshaft or crankshaft position sensor. The senor was on
> order before it started with the check engine light coming on. Since the
> light is on I can't even get the truck to stay running. As you as you
> crank it, it dies and if it does stay running, it is running very very
> rough with the rpm varing from 0 rpm to 2500 rpm without even pressing on
> the gas. I will let every one know as soon as I get the new CPS on if it
> is running alot better.
>
> Grace

 

I would recommend you just clean the plugs and sockets for both the
crank and cam sensors with a spray contact cleaner. Even WD40 will work
to see if it is just a bad connection.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

msgrace wrote:
>
> I have a new crankshaft position sensor on order from the Jeep dealer ship
> because the truck is now with the check engine light on and coding 11 for
> no crank reference signal detected during engine cranking; intermittent
> loss of either camshaft or crankshaft position sensor. The senor was on
> order before it started with the check engine light coming on. Since the
> light is on I can't even get the truck to stay running. As you as you
> crank it, it dies and if it does stay running, it is running very very
> rough with the rpm varing from 0 rpm to 2500 rpm without even pressing on
> the gas. I will let every one know as soon as I get the new CPS on if it
> is running alot better.
>
> Grace

 

Since you can't really make it any worse, try finding the connector for
the CPS, hard up by the firewall. Unplug it, look inside the connectors
to see if you see anything but shiny metal, plug it back in again and
see if it runs.


msgrace wrote:
> I have a new crankshaft position sensor on order from the Jeep dealer ship
> because the truck is now with the check engine light on and coding 11 for
> no crank reference signal detected during engine cranking; intermittent
> loss of either camshaft or crankshaft position sensor. The senor was on
> order before it started with the check engine light coming on. Since the
> light is on I can't even get the truck to stay running. As you as you
> crank it, it dies and if it does stay running, it is running very very
> rough with the rpm varing from 0 rpm to 2500 rpm without even pressing on
> the gas. I will let every one know as soon as I get the new CPS on if it
> is running alot better.
>
> Grace
>

 

Since you can't really make it any worse, try finding the connector for
the CPS, hard up by the firewall. Unplug it, look inside the connectors
to see if you see anything but shiny metal, plug it back in again and
see if it runs.


msgrace wrote:
> I have a new crankshaft position sensor on order from the Jeep dealer ship
> because the truck is now with the check engine light on and coding 11 for
> no crank reference signal detected during engine cranking; intermittent
> loss of either camshaft or crankshaft position sensor. The senor was on
> order before it started with the check engine light coming on. Since the
> light is on I can't even get the truck to stay running. As you as you
> crank it, it dies and if it does stay running, it is running very very
> rough with the rpm varing from 0 rpm to 2500 rpm without even pressing on
> the gas. I will let every one know as soon as I get the new CPS on if it
> is running alot better.
>
> Grace
>

 

Since you can't really make it any worse, try finding the connector for
the CPS, hard up by the firewall. Unplug it, look inside the connectors
to see if you see anything but shiny metal, plug it back in again and
see if it runs.


msgrace wrote:
> I have a new crankshaft position sensor on order from the Jeep dealer ship
> because the truck is now with the check engine light on and coding 11 for
> no crank reference signal detected during engine cranking; intermittent
> loss of either camshaft or crankshaft position sensor. The senor was on
> order before it started with the check engine light coming on. Since the
> light is on I can't even get the truck to stay running. As you as you
> crank it, it dies and if it does stay running, it is running very very
> rough with the rpm varing from 0 rpm to 2500 rpm without even pressing on
> the gas. I will let every one know as soon as I get the new CPS on if it
> is running alot better.
>
> Grace
>

 

Got my new cps installed yesterday and as of now no more problems with my
Jeep, even my gas milleage has improved. I hope this is the last time I
have to replace anything on it for awhile. Thanks to everyone for their
help.

Grace

 

Got my new cps installed yesterday and as of now no more problems with my
Jeep, even my gas milleage has improved. I hope this is the last time I
have to replace anything on it for awhile. Thanks to everyone for their
help.

Grace

 

Got my new cps installed yesterday and as of now no more problems with my
Jeep, even my gas milleage has improved. I hope this is the last time I
have to replace anything on it for awhile. Thanks to everyone for their
help.

Grace

 

Thanks you.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

msgrace wrote:
>
> Got my new cps installed yesterday and as of now no more problems with my
> Jeep, even my gas milleage has improved. I hope this is the last time I
> have to replace anything on it for awhile. Thanks to everyone for their
> help.
>
> Grace

 

Thanks you.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

msgrace wrote:
>
> Got my new cps installed yesterday and as of now no more problems with my
> Jeep, even my gas milleage has improved. I hope this is the last time I
> have to replace anything on it for awhile. Thanks to everyone for their
> help.
>
> Grace