96 Cherokee starts but won't run
Guest
Posts: n/a
96 Cherokee starts but won't run
I have a 96 Cherokee Sport that has developed a little problem. The
engine will start, but will not continue to run when in the "ON"
position. In fact, nothing works with the key in the "ON" or
"Accessories" positions. Dome Light and headlights work fine. For
about a week before, when I started the car, instead of letting the
key go back to the "ON" position by itself, I'd often have to move it
a little more. Once it was running on it's own, I'd be able to move
it back to the correct "ON" position.
I've done some looking around, and have found two common problems.
One is a relay, and the other is the ignition module. Has anybody had
this problem, and if so, what was the solution? If it's the relay,
which one would it be?
Thanks,
Wes
engine will start, but will not continue to run when in the "ON"
position. In fact, nothing works with the key in the "ON" or
"Accessories" positions. Dome Light and headlights work fine. For
about a week before, when I started the car, instead of letting the
key go back to the "ON" position by itself, I'd often have to move it
a little more. Once it was running on it's own, I'd be able to move
it back to the correct "ON" position.
I've done some looking around, and have found two common problems.
One is a relay, and the other is the ignition module. Has anybody had
this problem, and if so, what was the solution? If it's the relay,
which one would it be?
Thanks,
Wes
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Wes" <dirty_oar@yahoo.com> wrote in message
news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> I have a 96 Cherokee Sport that has developed a little problem. The
> engine will start, but will not continue to run when in the "ON"
> position. In fact, nothing works with the key in the "ON" or
> "Accessories" positions. Dome Light and headlights work fine. For
> about a week before, when I started the car, instead of letting the
> key go back to the "ON" position by itself, I'd often have to move it
> a little more. Once it was running on it's own, I'd be able to move
> it back to the correct "ON" position.
> I've done some looking around, and have found two common problems.
> One is a relay, and the other is the ignition module. Has anybody had
> this problem, and if so, what was the solution? If it's the relay,
> which one would it be?
> Thanks,
> Wes
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
concur
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
concur
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
concur
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
--
HarryS
JAFGBR
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Guest
Posts: n/a
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
resistor wire could be open. The ignition would work during start (bypass),
but would be open when in run.
--
Jim
"Jerry Bransford" <jerrypb@mecox.net> wrote in message
news:0otIb.34846$gN.1609@fed1read05...
> It sounds like the ignition switch itself has gone bad.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Wes" <dirty_oar@yahoo.com> wrote in message
> news:c946cdc6.0312302141.49ee0a8e@posting.google.c om...
> > I have a 96 Cherokee Sport that has developed a little problem. The
> > engine will start, but will not continue to run when in the "ON"
> > position. In fact, nothing works with the key in the "ON" or
> > "Accessories" positions. Dome Light and headlights work fine. For
> > about a week before, when I started the car, instead of letting the
> > key go back to the "ON" position by itself, I'd often have to move it
> > a little more. Once it was running on it's own, I'd be able to move
> > it back to the correct "ON" position.
> > I've done some looking around, and have found two common problems.
> > One is a relay, and the other is the ignition module. Has anybody had
> > this problem, and if so, what was the solution? If it's the relay,
> > which one would it be?
> > Thanks,
> > Wes
>
>
Thread
Thread Starter
Forum
Replies
Last Post
sami.lindgren@kotikone.fi
Jeep Mailing List
24
Aug 26, 2006 10:01 AM
Mick Miller
Jeep Mailing List
0
Mar 6, 2004 02:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
