96 Cherokee starts but won't run
I have a 96 Cherokee Sport that has developed a little problem. The
engine will start, but will not continue to run when in the "ON" position. In fact, nothing works with the key in the "ON" or "Accessories" positions. Dome Light and headlights work fine. For about a week before, when I started the car, instead of letting the key go back to the "ON" position by itself, I'd often have to move it a little more. Once it was running on it's own, I'd be able to move it back to the correct "ON" position. I've done some looking around, and have found two common problems. One is a relay, and the other is the ignition module. Has anybody had this problem, and if so, what was the solution? If it's the relay, which one would it be? Thanks, Wes |
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry -- Jerry Bransford To email, remove 'me' from my email address KC6TAY, PP-ASEL See the Geezer Jeep at http://members.cox.net/jerrypb/ "Wes" <dirty_oar@yahoo.com> wrote in message news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > I have a 96 Cherokee Sport that has developed a little problem. The > engine will start, but will not continue to run when in the "ON" > position. In fact, nothing works with the key in the "ON" or > "Accessories" positions. Dome Light and headlights work fine. For > about a week before, when I started the car, instead of letting the > key go back to the "ON" position by itself, I'd often have to move it > a little more. Once it was running on it's own, I'd be able to move > it back to the correct "ON" position. > I've done some looking around, and have found two common problems. > One is a relay, and the other is the ignition module. Has anybody had > this problem, and if so, what was the solution? If it's the relay, > which one would it be? > Thanks, > Wes |
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry -- Jerry Bransford To email, remove 'me' from my email address KC6TAY, PP-ASEL See the Geezer Jeep at http://members.cox.net/jerrypb/ "Wes" <dirty_oar@yahoo.com> wrote in message news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > I have a 96 Cherokee Sport that has developed a little problem. The > engine will start, but will not continue to run when in the "ON" > position. In fact, nothing works with the key in the "ON" or > "Accessories" positions. Dome Light and headlights work fine. For > about a week before, when I started the car, instead of letting the > key go back to the "ON" position by itself, I'd often have to move it > a little more. Once it was running on it's own, I'd be able to move > it back to the correct "ON" position. > I've done some looking around, and have found two common problems. > One is a relay, and the other is the ignition module. Has anybody had > this problem, and if so, what was the solution? If it's the relay, > which one would it be? > Thanks, > Wes |
Re: 96 Cherokee starts but won't run
It sounds like the ignition switch itself has gone bad.
Jerry -- Jerry Bransford To email, remove 'me' from my email address KC6TAY, PP-ASEL See the Geezer Jeep at http://members.cox.net/jerrypb/ "Wes" <dirty_oar@yahoo.com> wrote in message news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > I have a 96 Cherokee Sport that has developed a little problem. The > engine will start, but will not continue to run when in the "ON" > position. In fact, nothing works with the key in the "ON" or > "Accessories" positions. Dome Light and headlights work fine. For > about a week before, when I started the car, instead of letting the > key go back to the "ON" position by itself, I'd often have to move it > a little more. Once it was running on it's own, I'd be able to move > it back to the correct "ON" position. > I've done some looking around, and have found two common problems. > One is a relay, and the other is the ignition module. Has anybody had > this problem, and if so, what was the solution? If it's the relay, > which one would it be? > Thanks, > Wes |
Re: 96 Cherokee starts but won't run
concur
-- HarryS JAFGBR "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
Re: 96 Cherokee starts but won't run
concur
-- HarryS JAFGBR "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
Re: 96 Cherokee starts but won't run
concur
-- HarryS JAFGBR "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass), but would be open when in run. -- Jim "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass), but would be open when in run. -- Jim "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
Re: 96 Cherokee starts but won't run
Do these have the resistor wire that is bypassed during start? If so, the
resistor wire could be open. The ignition would work during start (bypass), but would be open when in run. -- Jim "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:0otIb.34846$gN.1609@fed1read05... > It sounds like the ignition switch itself has gone bad. > > Jerry > -- > Jerry Bransford > To email, remove 'me' from my email address > KC6TAY, PP-ASEL > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > > "Wes" <dirty_oar@yahoo.com> wrote in message > news:c946cdc6.0312302141.49ee0a8e@posting.google.c om... > > I have a 96 Cherokee Sport that has developed a little problem. The > > engine will start, but will not continue to run when in the "ON" > > position. In fact, nothing works with the key in the "ON" or > > "Accessories" positions. Dome Light and headlights work fine. For > > about a week before, when I started the car, instead of letting the > > key go back to the "ON" position by itself, I'd often have to move it > > a little more. Once it was running on it's own, I'd be able to move > > it back to the correct "ON" position. > > I've done some looking around, and have found two common problems. > > One is a relay, and the other is the ignition module. Has anybody had > > this problem, and if so, what was the solution? If it's the relay, > > which one would it be? > > Thanks, > > Wes > > |
All times are GMT -4. The time now is 12:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands