95 yj axle woes
10-14-2007, 05:42 PM
#1
Guest
Posts: n/a
95 yj axle woes
my new-to-me 95 yj's rear end is loud as hell and has a bent driver
side axle. (im guessing hard wheeling and sand/water crossings are to
blame) how much work might it be to swap in a whole rear end from an
xj ? i hear they are simler/the same.
side axle. (im guessing hard wheeling and sand/water crossings are to
blame) how much work might it be to swap in a whole rear end from an
xj ? i hear they are simler/the same.
10-14-2007, 06:07 PM
#2
Guest
Posts: n/a
Re: 95 yj axle woes
A bigger problem is finding the same ratio.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
10-14-2007, 06:07 PM
#3
Guest
Posts: n/a
Re: 95 yj axle woes
A bigger problem is finding the same ratio.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
10-14-2007, 06:07 PM
#4
Guest
Posts: n/a
Re: 95 yj axle woes
A bigger problem is finding the same ratio.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
10-14-2007, 06:07 PM
#5
Guest
Posts: n/a
Re: 95 yj axle woes
A bigger problem is finding the same ratio.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<kirayotaka@gmail.com> wrote in message
news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
10-14-2007, 07:16 PM
#6
Guest
Posts: n/a
Re: 95 yj axle woes
Bill is right. Make sure you find the ratio from the tag on the pumpkin
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
10-14-2007, 07:16 PM
#7
Guest
Posts: n/a
Re: 95 yj axle woes
Bill is right. Make sure you find the ratio from the tag on the pumpkin
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
10-14-2007, 07:16 PM
#8
Guest
Posts: n/a
Re: 95 yj axle woes
Bill is right. Make sure you find the ratio from the tag on the pumpkin
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
10-14-2007, 07:16 PM
#9
Guest
Posts: n/a
Re: 95 yj axle woes
Bill is right. Make sure you find the ratio from the tag on the pumpkin
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
cover, and that the donor has the same one. There are reports, that the
stock Dana 35c axle is not strong enough for the six cylinder engine. There
are some interesting axle swap links here.
http://www.jeeptech.com/convaxle/
Good luck.
Earle
"L.W. (Bill) ------ III" <LWBill------@------.net> wrote in message
news:feu47c$umk$1@registered.motzarella.org...
> A bigger problem is finding the same ratio.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> <kirayotaka@gmail.com> wrote in message
> news:1192398178.493247.309190@v29g2000prd.googlegr oups.com...
> > my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> > side axle. (im guessing hard wheeling and sand/water crossings are to
> > blame) how much work might it be to swap in a whole rear end from an
> > xj ? i hear they are simler/the same.
> >
>
>
10-14-2007, 08:06 PM
#10
Guest
Posts: n/a
Re: 95 yj axle woes
Seems to me I remember XJ's to be spring over? I was all set to pick
over a backyard full of XJ's for various axle parts, no go on all of them.
kirayotaka@gmail.com wrote:
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>
over a backyard full of XJ's for various axle parts, no go on all of them.
kirayotaka@gmail.com wrote:
> my new-to-me 95 yj's rear end is loud as hell and has a bent driver
> side axle. (im guessing hard wheeling and sand/water crossings are to
> blame) how much work might it be to swap in a whole rear end from an
> xj ? i hear they are simler/the same.
>