95 XJ front axle U-joints
#1
Guest
Posts: n/a
95 XJ front axle U-joints
Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
drivers side and it is not as bad but in need of replacement. Since I will
have the BFH out I figure I will do both sides this weekend.
On jack stands and getting liberal doses of PB Blaster as of this post.
Question:
I have done both sides on my 93 YJ,,,, is there any difference in the
procedure on the 95 XJ?
thanks
paul
drivers side and it is not as bad but in need of replacement. Since I will
have the BFH out I figure I will do both sides this weekend.
On jack stands and getting liberal doses of PB Blaster as of this post.
Question:
I have done both sides on my 93 YJ,,,, is there any difference in the
procedure on the 95 XJ?
thanks
paul
#2
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#3
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#4
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#5
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
None, other than you may not have an axle disengage:
http://www.----------.com/Dana30WheelBearing/index.htm
http://www.4x4wire.com/tech/axle/ujoint/
God Bless America, Bill O|||||||O
mailto:--------------------
paul wrote:
>
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#6
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger
size in the 95 (spicer 5-760x).
paul wrote:
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#7
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger
size in the 95 (spicer 5-760x).
paul wrote:
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#8
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger
size in the 95 (spicer 5-760x).
paul wrote:
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
#9
Guest
Posts: n/a
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger
size in the 95 (spicer 5-760x).
paul wrote:
> Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
> drivers side and it is not as bad but in need of replacement. Since I will
> have the BFH out I figure I will do both sides this weekend.
>
> On jack stands and getting liberal doses of PB Blaster as of this post.
>
> Question:
> I have done both sides on my 93 YJ,,,, is there any difference in the
> procedure on the 95 XJ?
>
> thanks
> paul
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)