95 XJ front axle U-joints
Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the
drivers side and it is not as bad but in need of replacement. Since I will have the BFH out I figure I will do both sides this weekend. On jack stands and getting liberal doses of PB Blaster as of this post. Question: I have done both sides on my 93 YJ,,,, is there any difference in the procedure on the 95 XJ? thanks paul |
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage: http://www.----------.com/Dana30WheelBearing/index.htm http://www.4x4wire.com/tech/axle/ujoint/ God Bless America, Bill O|||||||O mailto:-------------------- paul wrote: > > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage: http://www.----------.com/Dana30WheelBearing/index.htm http://www.4x4wire.com/tech/axle/ujoint/ God Bless America, Bill O|||||||O mailto:-------------------- paul wrote: > > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage: http://www.----------.com/Dana30WheelBearing/index.htm http://www.4x4wire.com/tech/axle/ujoint/ God Bless America, Bill O|||||||O mailto:-------------------- paul wrote: > > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
Hi Paul,
None, other than you may not have an axle disengage: http://www.----------.com/Dana30WheelBearing/index.htm http://www.4x4wire.com/tech/axle/ujoint/ God Bless America, Bill O|||||||O mailto:-------------------- paul wrote: > > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger size in the 95 (spicer 5-760x). paul wrote: > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger size in the 95 (spicer 5-760x). paul wrote: > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger size in the 95 (spicer 5-760x). paul wrote: > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
Re: 95 XJ front axle U-joints
The procedure should be the same. The u-joints themselves are a larger size in the 95 (spicer 5-760x). paul wrote: > Wife's 95 XJ - passenger side U-joint is toast,,,, I took a look at the > drivers side and it is not as bad but in need of replacement. Since I will > have the BFH out I figure I will do both sides this weekend. > > On jack stands and getting liberal doses of PB Blaster as of this post. > > Question: > I have done both sides on my 93 YJ,,,, is there any difference in the > procedure on the 95 XJ? > > thanks > paul |
All times are GMT -4. The time now is 09:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands