95 jeep grand cherokee
#2
Guest
Posts: n/a
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
#3
Guest
Posts: n/a
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
#4
Guest
Posts: n/a
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
I6 engine
Vibration damper-to-crankshaft bolt, 135ft/lbs, V8
cal
"jimbo7" <jdhighfield@cessna.textron.com> wrote in message
news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com...
> Can anybody tell me the torque requirements on the harmonic balancer?
>
#5
Guest
Posts: n/a
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
#6
Guest
Posts: n/a
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
#7
Guest
Posts: n/a
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
> Can anybody tell me the torque requirements on the harmonic balancer?
80. Watch the keyway and make sure the shaft is clean.
Also put a bit of motor oil on the shaft prior to pressing
it on. Makes things go easier.
http://members.***.net/wilsond/hb/
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
jeepadmin
Jeep News
0
07-01-2014 06:09 PM
bman
Jeep Mailing List
4
08-06-2007 05:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)