95 jeep grand cherokee
Can anybody tell me the torque requirements on the harmonic balancer?
|
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine Vibration damper-to-crankshaft bolt, 135ft/lbs, V8 cal "jimbo7" <jdhighfield@cessna.textron.com> wrote in message news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com... > Can anybody tell me the torque requirements on the harmonic balancer? > |
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine Vibration damper-to-crankshaft bolt, 135ft/lbs, V8 cal "jimbo7" <jdhighfield@cessna.textron.com> wrote in message news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com... > Can anybody tell me the torque requirements on the harmonic balancer? > |
Re: 95 jeep grand cherokee
according to Haynes, vibration damper center bolt, lubricated, 80 ft/lbs,
I6 engine Vibration damper-to-crankshaft bolt, 135ft/lbs, V8 cal "jimbo7" <jdhighfield@cessna.textron.com> wrote in message news:ea1e087ca2d7e61454c892a9eba2b507@localhost.ta lkaboutautos.com... > Can anybody tell me the torque requirements on the harmonic balancer? > |
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer? 80. Watch the keyway and make sure the shaft is clean. Also put a bit of motor oil on the shaft prior to pressing it on. Makes things go easier. http://members.cox.net/wilsond/hb/ -- DougW |
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer? 80. Watch the keyway and make sure the shaft is clean. Also put a bit of motor oil on the shaft prior to pressing it on. Makes things go easier. http://members.cox.net/wilsond/hb/ -- DougW |
Re: 95 jeep grand cherokee
jimbo7 did pass the time by typing:
> Can anybody tell me the torque requirements on the harmonic balancer? 80. Watch the keyway and make sure the shaft is clean. Also put a bit of motor oil on the shaft prior to pressing it on. Makes things go easier. http://members.cox.net/wilsond/hb/ -- DougW |
All times are GMT -4. The time now is 10:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands