94 YJ trouble shifting into gears, clutch pedal quirky
#41
Guest
Posts: n/a
Re: 94 YJ trouble shifting into gears, clutch pedal quirky
On Sun, 6 Jun 2004 12:15:17 UTC "Jerry McG"
<gmcgeorge.remove@frontier.net> wrote:
>
> Thanks, Will. I have a little Motive Power pressure bleeder that might work
> on it. Not sure I have an adapter that will fit the cap, however. The
> systems been on there for 11 years (it's August '93 production) and I'm sure
> it ought to be flushed.
That, and the fact it's black and no longer transparebt when you check
<g>?
I tried using a reverse pressure bleed from the bottom since I have a
couple of drawers full of misc. adapters and fitting accumulated over
the years. Never did get the mc to set up right - I think there is a
resevoir chamber in there similar to some of the old Bendix brake
masters that never gets flushed/purged except via a true bench bleed.
--
Will Honea
<gmcgeorge.remove@frontier.net> wrote:
>
> Thanks, Will. I have a little Motive Power pressure bleeder that might work
> on it. Not sure I have an adapter that will fit the cap, however. The
> systems been on there for 11 years (it's August '93 production) and I'm sure
> it ought to be flushed.
That, and the fact it's black and no longer transparebt when you check
<g>?
I tried using a reverse pressure bleed from the bottom since I have a
couple of drawers full of misc. adapters and fitting accumulated over
the years. Never did get the mc to set up right - I think there is a
resevoir chamber in there similar to some of the old Bendix brake
masters that never gets flushed/purged except via a true bench bleed.
--
Will Honea
Thread
Thread Starter
Forum
Replies
Last Post
bgambart@hotmail.com
Jeep Mailing List
28
08-07-2007 07:27 PM
Dave Milne
Jeep Mailing List
2
08-20-2003 04:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)