94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
i have the same year and the same engine, and no gasket or o-ring. but it
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
i have the same year and the same engine, and no gasket or o-ring. but it
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
i have the same year and the same engine, and no gasket or o-ring. but it
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
also leaks bad. but due to severe rust and corrosion i'm replacing the
headers and down pipe soon.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4096E925.39416AA1@***.net...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
I took the downtube off again today and snapped a pic
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
I took the downtube off again today and snapped a pic
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
I took the downtube off again today and snapped a pic
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
I took the downtube off again today and snapped a pic
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
http://www.7900films.com/misc/jeep_downtube.jpg
There's no gasket there, just a rounded metal part that fits in the
downtube. Is this enough to seal it? I fired the jeep up, felt
around the connection and didn't notice any air leaks.
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> The book I have for an '94 YJ four cylinder calls for that donut.
> It's been my experience that if it uses that type of O ring gasket, that
> it'll leak like crazy with anything else, so you must have after market
> headers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mr_man wrote:
> >
> > I ripped out my exhaust today to replace a bad catalytic converter and
> > muffler, and I noticed there wasn't any kind of gasket where the
> > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > metal to metal. Is there supposed to be a donut gasket or something
> > in there?
> >
> > I looked at the walker exhaust page for the YJ which is here
> > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > and it looks like they sell the gaskets I'm asking about, but only for
> > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > if there isn't supposed to be a gasket for my '94 4cyl.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
You have a cast iron header, interesting I thought and converted to
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
You have a cast iron header, interesting I thought and converted to
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
You have a cast iron header, interesting I thought and converted to
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
