94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
05-04-2004, 03:10 PM
#21
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
You have a cast iron header, interesting I thought and converted to
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
steel pipes before that. Yours is probably the best style of connection.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
05-04-2004, 03:11 PM
#22
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
http://www.----------.com/94YJExhaust.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
05-04-2004, 03:11 PM
#23
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
http://www.----------.com/94YJExhaust.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
05-04-2004, 03:11 PM
#24
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
http://www.----------.com/94YJExhaust.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
05-04-2004, 03:11 PM
#25
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
http://www.----------.com/94YJExhaust.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
God Bless America, ßill O|||||||O
mailto:--------------------
Robert Hahn wrote:
>
> i have the same year and the same engine, and no gasket or o-ring. but it
> also leaks bad. but due to severe rust and corrosion i'm replacing the
> headers and down pipe soon.
05-04-2004, 03:16 PM
#26
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
That engine has the same style cast header as the 258. I tried hard to
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
05-04-2004, 03:16 PM
#27
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
That engine has the same style cast header as the 258. I tried hard to
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
05-04-2004, 03:16 PM
#28
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
That engine has the same style cast header as the 258. I tried hard to
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
05-04-2004, 03:16 PM
#29
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
That engine has the same style cast header as the 258. I tried hard to
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
get a gasket in mine because the shop listed it. LOL! I tried real
hard too. Bugger wouldn't last a day....
No gasket needed.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
mr_man wrote:
>
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<4096E925.39416AA1@***.net>...
> > The book I have for an '94 YJ four cylinder calls for that donut.
> > It's been my experience that if it uses that type of O ring gasket, that
> > it'll leak like crazy with anything else, so you must have after market
> > headers.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mr_man wrote:
> > >
> > > I ripped out my exhaust today to replace a bad catalytic converter and
> > > muffler, and I noticed there wasn't any kind of gasket where the
> > > exhaust headers meet with the exhaust pipe that goes to the cat. Just
> > > metal to metal. Is there supposed to be a donut gasket or something
> > > in there?
> > >
> > > I looked at the walker exhaust page for the YJ which is here
> > > http://www.walkerexhaust.com/ExhaustCouponScreen.asp
> > > and it looks like they sell the gaskets I'm asking about, but only for
> > > the 6cyl and earlier 4cyl exhausts (91-92) ... which makes me wonder
> > > if there isn't supposed to be a gasket for my '94 4cyl.
05-04-2004, 03:37 PM
#30
Guest
Posts: n/a
Re: 94 YJ 4cyl -- missing gasket between headers and exhaust pipe?
Mines the same for a 93 yj. If that hookup isn't perfectly round, you get
leaks. You have to handle the area delicatly to prevent any mishapping.
You can use a hightemp copper gasket sealant. It works pretty well.
Nick
"mr_man" <7900junk@mindspring.com> wrote in message
news:de6e3b48.0405041101.157794d0@posting.google.c om...
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>
leaks. You have to handle the area delicatly to prevent any mishapping.
You can use a hightemp copper gasket sealant. It works pretty well.
Nick
"mr_man" <7900junk@mindspring.com> wrote in message
news:de6e3b48.0405041101.157794d0@posting.google.c om...
> I took the downtube off again today and snapped a pic
>
> http://www.7900films.com/misc/jeep_downtube.jpg
>
> There's no gasket there, just a rounded metal part that fits in the
> downtube. Is this enough to seal it? I fired the jeep up, felt
> around the connection and didn't notice any air leaks.
>