93 ZJ "clunk" in front axle
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
Is your your tierod end apart of that drag link:
http://www.----------.com/temp/TJalignment.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
http://www.----------.com/temp/TJalignment.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
Is your your tierod end apart of that drag link:
http://www.----------.com/temp/TJalignment.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
http://www.----------.com/temp/TJalignment.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
That is part of the drag link on my Jeeps. The expensive part....
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
That is part of the drag link on my Jeeps. The expensive part....
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
That is part of the drag link on my Jeeps. The expensive part....
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
You can change that yourself pretty easy. It's adjusting end is to
center the steering wheel only and has no bearing on the front end
alignment.
I back off the big nut to the top of the threads and give it a hard hit
with a large hammer, commonly known as a BFH. That usually pops it
out. The other end needs penetrating fluid and two nuts and bolts on
either end of a sleeve clamp to loosen.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Ron Croonenberg wrote:
>
> Ok, I looked at it with a friend of mine. It seems that the part where
> the draglink ataches to the hub/spindle/steeringknuckle or whatever it
> is called is worn and has some play in it. (it's like a tie rod end but
> then on what the service manual calls the draglink)
>
> Does the whole draglink need to be replaced ? or can the end of it be
> replaced ?
>
> thanks,
>
> Ron
>
> Ron Croonenberg wrote:
> > Hello all,
> >
> > when I drive through a rut or a pot hole with the front passenger wheel
> > I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
> > the wheel inside and heard a pop (just bearly heard it.
> >
> > So I am wondering, is there a bearing there that's worn out what does
> > that ?
> >
> > Well actuall what I am asking is.. How can I determine what it is ?
> >
> > thanks,
> >
> > Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
Ah... that's good to know.
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
Ah... that's good to know.
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
Ah... that's good to know.
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Since it has been "flapping" around because of the play. I probably
will have an alignment done anyway.
I have the tool somewhere in my garage. (My '79 CJ5 uses the same
special BFH tool. )
hanks for the help.
Ron
Mike Romain wrote:
> That is part of the drag link on my Jeeps. The expensive part....
>
> You can change that yourself pretty easy. It's adjusting end is to
> center the steering wheel only and has no bearing on the front end
> alignment.
>
> I back off the big nut to the top of the threads and give it a hard hit
> with a large hammer, commonly known as a BFH. That usually pops it
> out. The other end needs penetrating fluid and two nuts and bolts on
> either end of a sleeve clamp to loosen.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Ron Croonenberg wrote:
>
>>Ok, I looked at it with a friend of mine. It seems that the part where
>>the draglink ataches to the hub/spindle/steeringknuckle or whatever it
>>is called is worn and has some play in it. (it's like a tie rod end but
>>then on what the service manual calls the draglink)
>>
>>Does the whole draglink need to be replaced ? or can the end of it be
>>replaced ?
>>
>>thanks,
>>
>>Ron
>>
>>Ron Croonenberg wrote:
>>
>>>Hello all,
>>>
>>>when I drive through a rut or a pot hole with the front passenger wheel
>>>I hear sort of a "clunk". Yesterday I pushed (with my foot) the top of
>>>the wheel inside and heard a pop (just bearly heard it.
>>>
>>>So I am wondering, is there a bearing there that's worn out what does
>>>that ?
>>>
>>>Well actuall what I am asking is.. How can I determine what it is ?
>>>
>>>thanks,
>>>
>>>Ron
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
The trackbar is the piece from the frame to the axle, right ?
Are those easy to replace ? (I might as well do everything easy one
under there)
Matt Macchiarolo wrote:
> I'm guessing track bar bushing might be shot.
>
> "Ron Croonenberg" <ronc@depauw.edu> wrote in message
> news:e016d9$kvq$1@news.csc.depauw.edu...
>
>>Hello all,
>>
>>when I drive through a rut or a pot hole with the front passenger wheel I
>>hear sort of a "clunk". Yesterday I pushed (with my foot) the top of the
>>wheel inside and heard a pop (just bearly heard it.
>>
>>So I am wondering, is there a bearing there that's worn out what does that
>>?
>>
>>Well actuall what I am asking is.. How can I determine what it is ?
>>
>>thanks,
>>
>>Ron
>
>
>
Are those easy to replace ? (I might as well do everything easy one
under there)
Matt Macchiarolo wrote:
> I'm guessing track bar bushing might be shot.
>
> "Ron Croonenberg" <ronc@depauw.edu> wrote in message
> news:e016d9$kvq$1@news.csc.depauw.edu...
>
>>Hello all,
>>
>>when I drive through a rut or a pot hole with the front passenger wheel I
>>hear sort of a "clunk". Yesterday I pushed (with my foot) the top of the
>>wheel inside and heard a pop (just bearly heard it.
>>
>>So I am wondering, is there a bearing there that's worn out what does that
>>?
>>
>>Well actuall what I am asking is.. How can I determine what it is ?
>>
>>thanks,
>>
>>Ron
>
>
>
Guest
Posts: n/a
Re: 93 ZJ "clunk" in front axle
The trackbar is the piece from the frame to the axle, right ?
Are those easy to replace ? (I might as well do everything easy one
under there)
Matt Macchiarolo wrote:
> I'm guessing track bar bushing might be shot.
>
> "Ron Croonenberg" <ronc@depauw.edu> wrote in message
> news:e016d9$kvq$1@news.csc.depauw.edu...
>
>>Hello all,
>>
>>when I drive through a rut or a pot hole with the front passenger wheel I
>>hear sort of a "clunk". Yesterday I pushed (with my foot) the top of the
>>wheel inside and heard a pop (just bearly heard it.
>>
>>So I am wondering, is there a bearing there that's worn out what does that
>>?
>>
>>Well actuall what I am asking is.. How can I determine what it is ?
>>
>>thanks,
>>
>>Ron
>
>
>
Are those easy to replace ? (I might as well do everything easy one
under there)
Matt Macchiarolo wrote:
> I'm guessing track bar bushing might be shot.
>
> "Ron Croonenberg" <ronc@depauw.edu> wrote in message
> news:e016d9$kvq$1@news.csc.depauw.edu...
>
>>Hello all,
>>
>>when I drive through a rut or a pot hole with the front passenger wheel I
>>hear sort of a "clunk". Yesterday I pushed (with my foot) the top of the
>>wheel inside and heard a pop (just bearly heard it.
>>
>>So I am wondering, is there a bearing there that's worn out what does that
>>?
>>
>>Well actuall what I am asking is.. How can I determine what it is ?
>>
>>thanks,
>>
>>Ron
>
>
>
