93 YJ front hub Removal
11-19-2003, 10:29 PM
#11
Guest
Posts: n/a
Re: 93 YJ front hub Removal
36mm.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-19-2003, 10:29 PM
#12
Guest
Posts: n/a
Re: 93 YJ front hub Removal
36mm.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-19-2003, 10:29 PM
#13
Guest
Posts: n/a
Re: 93 YJ front hub Removal
36mm.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-20-2003, 10:50 AM
#14
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Why bother messing around with the axle?
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-20-2003, 10:50 AM
#15
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Why bother messing around with the axle?
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-20-2003, 10:50 AM
#16
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Why bother messing around with the axle?
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
I helped a gent do one last week and we just left the axle in place and
pulled the whole works out.
The u-joints can be replaced easily with the axle still bolted to the
hub.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-21-2003, 02:05 AM
#17
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Thats assuming you can get the hub out of the knuckle. If this is
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
11-21-2003, 02:05 AM
#18
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Thats assuming you can get the hub out of the knuckle. If this is
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
11-21-2003, 02:05 AM
#19
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Thats assuming you can get the hub out of the knuckle. If this is
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
the first time, it will be rusted in SOLID.
Mike Romain wrote:
> Why bother messing around with the axle?
>
> I helped a gent do one last week and we just left the axle in place and
> pulled the whole works out.
>
> The u-joints can be replaced easily with the axle still bolted to the
> hub.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Cliff wrote:
>
>>Anyone know what size socket I will need to get the axel nuts off my 93 YJ
>>wrangler? I need to pull the hubs so that I can replace the universals.
>>Did this once about 6 years ago, just cant remember what size the nut was.
>>36mm seems to come to mind but not sure.
>>
>>Thanks
>>Cliff
11-21-2003, 01:03 PM
#20
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Either way it still must be removed. Next time use a cold chisel to
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
