'93 JGC DTC Code 12?????
#1
Guest
Posts: n/a
'93 JGC DTC Code 12?????
My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
the service manual. I checked it four times, so I am sure it is
reading 12. There is a Code 11, and I did have a problem starting the
other day. Code 11 is "No crank reference signal at PCM." That could
have been my problem, Anyone know about a Code 12? Could the PCM
just be a little mixed up and reading out the wrong (but close) code?
The Jeep was built in August 1992.
----
Remove 33 from address
the service manual. I checked it four times, so I am sure it is
reading 12. There is a Code 11, and I did have a problem starting the
other day. Code 11 is "No crank reference signal at PCM." That could
have been my problem, Anyone know about a Code 12? Could the PCM
just be a little mixed up and reading out the wrong (but close) code?
The Jeep was built in August 1992.
----
Remove 33 from address
#2
Guest
Posts: n/a
Re: '93 JGC DTC Code 12?????
A '12' code is nothing, it usually means nothing more than the battery has
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
#3
Guest
Posts: n/a
Re: '93 JGC DTC Code 12?????
A '12' code is nothing, it usually means nothing more than the battery has
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
#4
Guest
Posts: n/a
Re: '93 JGC DTC Code 12?????
A '12' code is nothing, it usually means nothing more than the battery has
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
been disconnected sometime in the not too distant history. My Jeep has
maybe not had the '12' code 2-3 times in 7 years.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"----" <r------33@cableone.net> wrote in message
news:q3enuv8892ge9ten0tcml8v39l5dhstdrv@4ax.com...
> My '93 JGC V-8 is reading out DTC Code 12. There is no such code in
> the service manual. I checked it four times, so I am sure it is
> reading 12. There is a Code 11, and I did have a problem starting the
> other day. Code 11 is "No crank reference signal at PCM." That could
> have been my problem, Anyone know about a Code 12? Could the PCM
> just be a little mixed up and reading out the wrong (but close) code?
> The Jeep was built in August 1992.
>
> ----
> Remove 33 from address
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)