93 Grand Cherokee Power Window
#11
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
"D" wrote ...
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#12
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
"D" wrote ...
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#13
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
"D" wrote ...
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Hi All,
> The window went down in the driver door and wont go back up. Power to it
> okay.
> Is there a web site that shows picks of the regulator, et-al so I can clean
> it up? Maybe make it work for a little while longer?
> I'll be putting the switch back together as I wait for an answer. Heh.
Take the door panel off (watch the edges they are very sharp)
then look at the plastic connector that snaps to the power window
switch assembly. Odds are it has come unhooked. The way that
switch works if the motor has power then it has to be the switch
or the connector. The one on my passenger side broke and I had
to put a zip-tie in to hold it on.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#14
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Sorry, I didn't believe you, when you said it was of the scissors
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
#15
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Sorry, I didn't believe you, when you said it was of the scissors
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
#16
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Sorry, I didn't believe you, when you said it was of the scissors
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
design: http://www.----------.com/temp/94ZJwindowRegulator.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
D wrote:
>
> Thanks Bill,
> New info. I can hear a 'click' when I activate the switch to go up.
> The .jpg you sent is good, but my mechanism is a 'scissor' type affair. I
> remember there's a spring loaded arm in there that about took my thumb off a
> few years ago when I was messing with something else.
> Any other thoughts?
> Thanks
#17
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Hi Doug,
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#18
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Hi Doug,
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#19
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
Hi Doug,
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Thanks. I have the panel off and the connectors are all on and okay. This
was when I popped the switch assembly apart and 8 little brass rockers fell
out. Heh. Got it back together okay though, after filing the contacts.
So, re-cap. The window's down, I hear a light click inside the door near the
motor when I move the switch. I'm getting ready to pull the scissor out and
see if the window might have overtraveled and gone off the semi-circular
gear.
I'll blow out the motor while I'm at it and see if that helps.
Thanks for any further advice?
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
#20
Guest
Posts: n/a
Re: 93 Grand Cherokee Power Window
And an update.
Got the scissor rack out, along with the motor and gear assembly. I remember
this setup now as it about took my thumb off a few years ago when I unbolted
the motor from the housing. There's a powerful spring there.
Anyway, I hooked it all up electrically outside the door and tried it.
Nothing. Tapped on the motor housing and 'poof' it works smoothly and
strongly now.
Any bets on how long it will last now? Hopefully for another month when my
raise kicks in and I can trade the old gal in on an '01 or '02. She's
getting to be too much for me.
Thanks all for your help and support.
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>
Got the scissor rack out, along with the motor and gear assembly. I remember
this setup now as it about took my thumb off a few years ago when I unbolted
the motor from the housing. There's a powerful spring there.
Anyway, I hooked it all up electrically outside the door and tried it.
Nothing. Tapped on the motor housing and 'poof' it works smoothly and
strongly now.
Any bets on how long it will last now? Hopefully for another month when my
raise kicks in and I can trade the old gal in on an '01 or '02. She's
getting to be too much for me.
Thanks all for your help and support.
D
"DougW" <post.replies@invalid.address> wrote in message
news:1Dgtg.66419$9c6.43085@dukeread11...
> "D" wrote ...
> > Hi All,
> > The window went down in the driver door and wont go back up. Power to it
> > okay.
> > Is there a web site that shows picks of the regulator, et-al so I can
clean
> > it up? Maybe make it work for a little while longer?
> > I'll be putting the switch back together as I wait for an answer. Heh.
>
> Take the door panel off (watch the edges they are very sharp)
> then look at the plastic connector that snaps to the power window
> switch assembly. Odds are it has come unhooked. The way that
> switch works if the motor has power then it has to be the switch
> or the connector. The one on my passenger side broke and I had
> to put a zip-tie in to hold it on.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>