SBlackfoot

> Or you can get a build sheet via e-mail through the Jeep Customer
> Assistance. In the block where you are to put a question just enter
"Build
> Sheet Request"

Thanks for the advice guys. Believe it or not I already requested the build
sheet back when I got the Jeep, I just didn't realize it mentioned the model
of tranny. If I am to believe the info I have a 46RH. Of course, according
to the build sheet I also have "power rack and pinion steering". Uh yeah...
*rolleyes*



--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.

SBlackfoot

> Or you can get a build sheet via e-mail through the Jeep Customer
> Assistance. In the block where you are to put a question just enter
"Build
> Sheet Request"

Thanks for the advice guys. Believe it or not I already requested the build
sheet back when I got the Jeep, I just didn't realize it mentioned the model
of tranny. If I am to believe the info I have a 46RH. Of course, according
to the build sheet I also have "power rack and pinion steering". Uh yeah...
*rolleyes*



--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.

SBlackfoot

> Or you can get a build sheet via e-mail through the Jeep Customer
> Assistance. In the block where you are to put a question just enter
"Build
> Sheet Request"

Thanks for the advice guys. Believe it or not I already requested the build
sheet back when I got the Jeep, I just didn't realize it mentioned the model
of tranny. If I am to believe the info I have a 46RH. Of course, according
to the build sheet I also have "power rack and pinion steering". Uh yeah...
*rolleyes*



--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.

DougW

SBlackfoot wrote:
>> Or you can get a build sheet via e-mail through the Jeep Customer
>> Assistance. In the block where you are to put a question just enter
>> "Build Sheet Request"
>
> Thanks for the advice guys. Believe it or not I already requested the
> build sheet back when I got the Jeep, I just didn't realize it
> mentioned the model of tranny. If I am to believe the info I have a
> 46RH. Of course, according to the build sheet I also have "power rack
> and pinion steering". Uh yeah... *rolleyes*

46RH is a four speed with overdrive transmission.
http://www.jeeptech.com/trans/46rh.html
They don't have a pic but if you have the V8 you most likely have the 46RH.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

DougW

SBlackfoot wrote:
>> Or you can get a build sheet via e-mail through the Jeep Customer
>> Assistance. In the block where you are to put a question just enter
>> "Build Sheet Request"
>
> Thanks for the advice guys. Believe it or not I already requested the
> build sheet back when I got the Jeep, I just didn't realize it
> mentioned the model of tranny. If I am to believe the info I have a
> 46RH. Of course, according to the build sheet I also have "power rack
> and pinion steering". Uh yeah... *rolleyes*

46RH is a four speed with overdrive transmission.
http://www.jeeptech.com/trans/46rh.html
They don't have a pic but if you have the V8 you most likely have the 46RH.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

DougW

SBlackfoot wrote:
>> Or you can get a build sheet via e-mail through the Jeep Customer
>> Assistance. In the block where you are to put a question just enter
>> "Build Sheet Request"
>
> Thanks for the advice guys. Believe it or not I already requested the
> build sheet back when I got the Jeep, I just didn't realize it
> mentioned the model of tranny. If I am to believe the info I have a
> 46RH. Of course, according to the build sheet I also have "power rack
> and pinion steering". Uh yeah... *rolleyes*

46RH is a four speed with overdrive transmission.
http://www.jeeptech.com/trans/46rh.html
They don't have a pic but if you have the V8 you most likely have the 46RH.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

L.W.(Bill) Hughes III

I believe it's a stretch of the imagination, too, And Saginaw that
made the box never called it that, but the worm does use endless *****
to convert the movement to about three inches of teeth that do act like
a foot long rack to a cheap looking sector shaft:
http://www.----------.com/97TJpowersteering.pdf
God Bless America, Bill O|||||||O
mailto:--------------------

SBlackfoot wrote:
>
> Thanks for the advice guys. Believe it or not I already requested the build
> sheet back when I got the Jeep, I just didn't realize it mentioned the model
> of tranny. If I am to believe the info I have a 46RH. Of course, according
> to the build sheet I also have "power rack and pinion steering". Uh yeah...
> *rolleyes*

L.W.(Bill) Hughes III

I believe it's a stretch of the imagination, too, And Saginaw that
made the box never called it that, but the worm does use endless *****
to convert the movement to about three inches of teeth that do act like
a foot long rack to a cheap looking sector shaft:
http://www.----------.com/97TJpowersteering.pdf
God Bless America, Bill O|||||||O
mailto:--------------------

SBlackfoot wrote:
>
> Thanks for the advice guys. Believe it or not I already requested the build
> sheet back when I got the Jeep, I just didn't realize it mentioned the model
> of tranny. If I am to believe the info I have a 46RH. Of course, according
> to the build sheet I also have "power rack and pinion steering". Uh yeah...
> *rolleyes*

L.W.(Bill) Hughes III

I believe it's a stretch of the imagination, too, And Saginaw that
made the box never called it that, but the worm does use endless *****
to convert the movement to about three inches of teeth that do act like
a foot long rack to a cheap looking sector shaft:
http://www.----------.com/97TJpowersteering.pdf
God Bless America, Bill O|||||||O
mailto:--------------------

SBlackfoot wrote:
>
> Thanks for the advice guys. Believe it or not I already requested the build
> sheet back when I got the Jeep, I just didn't realize it mentioned the model
> of tranny. If I am to believe the info I have a 46RH. Of course, according
> to the build sheet I also have "power rack and pinion steering". Uh yeah...
> *rolleyes*