91 Jeep Cherokee 4.0 engine transplant.
10-05-2006, 11:52 PM
#101
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Film, what's that? <G>
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
10-05-2006, 11:52 PM
#102
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Film, what's that? <G>
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
10-05-2006, 11:52 PM
#103
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Film, what's that? <G>
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
Jeff DeWitt
Mike Romain wrote:
> Ran out of film?
>
> Mike
>
> "L.W.(Bill) ------ III" wrote:
>
>>Hi Mike,
>> OK But I wonder with all their pictures what held them up from
>>taking the picture after this one supposedly with a carburetor
>>manifold??????
>>http://www.off-road.com/jeep/tech/en...adconv/156.jpg
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Mike Romain wrote:
>>
>>>Sure Bill, here you are:
>>>
>>>http://www.off-road.com/jeep/new/40conv.html
>>>
>>>To quote from the site:
>>>
>>>From here, put your carb back onto the intake manifold including all the
>>>vacuum lines, fuel lines, etc as you took them off.
>>>
>>>End quote.
>>>
>>>And the parts needed list:
>>>
>>>4.0L Head Provided by Koller Dodge
>>>- 4.0L Head Gasket
>>>- 4.0L Exhaust Manifold or Header
>>>- Exhaust Manifold Gasket
>>>- 4.0L Valve Cover
>>>- 4.0L Valve Cover Gasket
>>>- Tubes of QuikSteel Epoxy Putty
>>>- Sand Paper (fine)
>>>
>>>--------------------
>>>
>>>Note no intake needed as the old 258 one with it's carb will be used.
>>>
>>>Mike
Thread
Thread Starter
Forum
Replies
Last Post
chevycruser_03
Jeep Mailing List
32
05-21-2005 03:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
