91 Jeep Cherokee 4.0 engine transplant.
#91
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
Grandkids to play with now.
God Bless America, Bill O|||||||O
mailto:--------------------
Simon Juncal wrote:
>
> No I just resent to Bill, I just realized my munged up email address
> from newsgroups (I hit reply all last night) botched my last attempt.
>
> --
> Simon
Grandkids to play with now.
God Bless America, Bill O|||||||O
mailto:--------------------
Simon Juncal wrote:
>
> No I just resent to Bill, I just realized my munged up email address
> from newsgroups (I hit reply all last night) botched my last attempt.
>
> --
> Simon
#92
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Hi Mike,
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
#93
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Hi Mike,
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
#94
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Hi Mike,
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
OK But I wonder with all their pictures what held them up from
taking the picture after this one supposedly with a carburetor
manifold??????
http://www.off-road.com/jeep/tech/en...adconv/156.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> Sure Bill, here you are:
>
> http://www.off-road.com/jeep/new/40conv.html
>
> To quote from the site:
>
> From here, put your carb back onto the intake manifold including all the
> vacuum lines, fuel lines, etc as you took them off.
>
> End quote.
>
> And the parts needed list:
>
> 4.0L Head Provided by Koller Dodge
> - 4.0L Head Gasket
> - 4.0L Exhaust Manifold or Header
> - Exhaust Manifold Gasket
> - 4.0L Valve Cover
> - 4.0L Valve Cover Gasket
> - Tubes of QuikSteel Epoxy Putty
> - Sand Paper (fine)
>
> --------------------
>
> Note no intake needed as the old 258 one with it's carb will be used.
>
> Mike
#95
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Ran out of film?
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
#96
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Ran out of film?
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
#97
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
Ran out of film?
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
Mike
"L.W.(Bill) ------ III" wrote:
>
> Hi Mike,
> OK But I wonder with all their pictures what held them up from
> taking the picture after this one supposedly with a carburetor
> manifold??????
> http://www.off-road.com/jeep/tech/en...adconv/156.jpg
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > Sure Bill, here you are:
> >
> > http://www.off-road.com/jeep/new/40conv.html
> >
> > To quote from the site:
> >
> > From here, put your carb back onto the intake manifold including all the
> > vacuum lines, fuel lines, etc as you took them off.
> >
> > End quote.
> >
> > And the parts needed list:
> >
> > 4.0L Head Provided by Koller Dodge
> > - 4.0L Head Gasket
> > - 4.0L Exhaust Manifold or Header
> > - Exhaust Manifold Gasket
> > - 4.0L Valve Cover
> > - 4.0L Valve Cover Gasket
> > - Tubes of QuikSteel Epoxy Putty
> > - Sand Paper (fine)
> >
> > --------------------
> >
> > Note no intake needed as the old 258 one with it's carb will be used.
> >
> > Mike
#98
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
L.W.(Bill) ------ III wrote:
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
#99
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
L.W.(Bill) ------ III wrote:
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
#100
Guest
Posts: n/a
Re: 91 Jeep Cherokee 4.0 engine transplant.
L.W.(Bill) ------ III wrote:
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein
> Got it: http://www.----------.com/temp/bill_is_wrong.jpg I have my
> Grandkids to play with now.
> God Bless America, Bill O|||||||O
After all that crap that's all you have to say? I think you should spend
more time playing with grandkids and less time arguing about ---- you
haven't got a clue about Bill.
--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein