90 XJ Won't start
Guest
Posts: n/a
90 XJ Won't start
It all started with a leaking o ring where #1 injector enters the
intake. I replaced all o rings and when I tried to start it it fired a
few times a little hard and started sounding different when turning
over, a little higher pitched and more of a load / drag on the starter.
Fuel pressure is good, installed a new CPS and did a tune-up.....Any
suggestions? I'm at my wits end
intake. I replaced all o rings and when I tried to start it it fired a
few times a little hard and started sounding different when turning
over, a little higher pitched and more of a load / drag on the starter.
Fuel pressure is good, installed a new CPS and did a tune-up.....Any
suggestions? I'm at my wits end
Guest
Posts: n/a
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Guest
Posts: n/a
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Guest
Posts: n/a
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Do you want to now get totally confused?
Folks were following your saga now it starts again.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JRK58@MSN.COM wrote:
>
> It all started with a leaking o ring where #1 injector enters the
> intake. I replaced all o rings and when I tried to start it it fired a
> few times a little hard and started sounding different when turning
> over, a little higher pitched and more of a load / drag on the starter.
> Fuel pressure is good, installed a new CPS and did a tune-up.....Any
> suggestions? I'm at my wits end
Guest
Posts: n/a
Guest
Posts: n/a
Guest
Posts: n/a
Thread
Thread Starter
Forum
Replies
Last Post
Tom Russell
Jeep Mailing List
45
Nov 19, 2003 05:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
