90 XJ Won't start
It all started with a leaking o ring where #1 injector enters the
intake. I replaced all o rings and when I tried to start it it fired a few times a little hard and started sounding different when turning over, a little higher pitched and more of a load / drag on the starter. Fuel pressure is good, installed a new CPS and did a tune-up.....Any suggestions? I'm at my wits end |
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused? Folks were following your saga now it starts again. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's JRK58@MSN.COM wrote: > > It all started with a leaking o ring where #1 injector enters the > intake. I replaced all o rings and when I tried to start it it fired a > few times a little hard and started sounding different when turning > over, a little higher pitched and more of a load / drag on the starter. > Fuel pressure is good, installed a new CPS and did a tune-up.....Any > suggestions? I'm at my wits end |
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused? Folks were following your saga now it starts again. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's JRK58@MSN.COM wrote: > > It all started with a leaking o ring where #1 injector enters the > intake. I replaced all o rings and when I tried to start it it fired a > few times a little hard and started sounding different when turning > over, a little higher pitched and more of a load / drag on the starter. > Fuel pressure is good, installed a new CPS and did a tune-up.....Any > suggestions? I'm at my wits end |
Re: 90 XJ Won't start
Why did you start a second thread?
Do you want to now get totally confused? Folks were following your saga now it starts again. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's JRK58@MSN.COM wrote: > > It all started with a leaking o ring where #1 injector enters the > intake. I replaced all o rings and when I tried to start it it fired a > few times a little hard and started sounding different when turning > over, a little higher pitched and more of a load / drag on the starter. > Fuel pressure is good, installed a new CPS and did a tune-up.....Any > suggestions? I'm at my wits end |
Re: 90 XJ Won't start
I don't know what the heck i'm doing
|
Re: 90 XJ Won't start
I don't know what the heck i'm doing
|
Re: 90 XJ Won't start
I don't know what the heck i'm doing
|
Re: 90 XJ Won't start
|
Re: 90 XJ Won't start
|
Re: 90 XJ Won't start
|
All times are GMT -4. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands