58 willys truck
#21
Guest
Posts: n/a
what was I thinking?
Thanks for all the advice. I should have known-of course it needs to be
rebuilt.
"Alan Haley" <ahaley@tdstelme.net> wrote in message
news:3ff0630c_2@newspeer2.tds.net...
> I am building a 58 ****** truck. Right now I am finishing up the brakes
and
> thinking about the tranny. The transmission is coated with grease and
oil.
> Of course, it was under this old rig for a lot of years and would have
> picked up a lot of engine oil and grease. The problem is, I cant tell if
it
> is just normal dirty or needs seals and bearings replaced. I dont want to
> install it, put the body on and after a few thousand miles find out I
should
> have done some work on the transmission. What do you all think?
>
>
>
rebuilt.
"Alan Haley" <ahaley@tdstelme.net> wrote in message
news:3ff0630c_2@newspeer2.tds.net...
> I am building a 58 ****** truck. Right now I am finishing up the brakes
and
> thinking about the tranny. The transmission is coated with grease and
oil.
> Of course, it was under this old rig for a lot of years and would have
> picked up a lot of engine oil and grease. The problem is, I cant tell if
it
> is just normal dirty or needs seals and bearings replaced. I dont want to
> install it, put the body on and after a few thousand miles find out I
should
> have done some work on the transmission. What do you all think?
>
>
>
#22
Guest
Posts: n/a
what was I thinking?
Thanks for all the advice. I should have known-of course it needs to be
rebuilt.
"Alan Haley" <ahaley@tdstelme.net> wrote in message
news:3ff0630c_2@newspeer2.tds.net...
> I am building a 58 ****** truck. Right now I am finishing up the brakes
and
> thinking about the tranny. The transmission is coated with grease and
oil.
> Of course, it was under this old rig for a lot of years and would have
> picked up a lot of engine oil and grease. The problem is, I cant tell if
it
> is just normal dirty or needs seals and bearings replaced. I dont want to
> install it, put the body on and after a few thousand miles find out I
should
> have done some work on the transmission. What do you all think?
>
>
>
rebuilt.
"Alan Haley" <ahaley@tdstelme.net> wrote in message
news:3ff0630c_2@newspeer2.tds.net...
> I am building a 58 ****** truck. Right now I am finishing up the brakes
and
> thinking about the tranny. The transmission is coated with grease and
oil.
> Of course, it was under this old rig for a lot of years and would have
> picked up a lot of engine oil and grease. The problem is, I cant tell if
it
> is just normal dirty or needs seals and bearings replaced. I dont want to
> install it, put the body on and after a few thousand miles find out I
should
> have done some work on the transmission. What do you all think?
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
jeepadmin
Jeep News
0
10-14-2014 09:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)