4WD light
#21
Guest
Posts: n/a
Re: 4WD light
Good advice.
If you don't want to buy the kit, it's pretty easy to rig up a cable
pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
small hose clamp, and four nuts:
http://xjeep.dyndns.org/posilok
I reused the crap aluminum shift fork. Works okay for now, but I'll
upgrade to a cast iron fork if it gets too sloppy.
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Might think about converting it over to cable operation:
> http://4x4posi-lok.com/jeep_page.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Foot Loose wrote:
>
>>The shift motor is leaking causing vacuum to be present at the switch all
>>the time. Looks like I'll be getting a new motor.
>>
>>Thanks for all the answers you guys rock
>>
>>Scott
>>90YJ
If you don't want to buy the kit, it's pretty easy to rig up a cable
pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
small hose clamp, and four nuts:
http://xjeep.dyndns.org/posilok
I reused the crap aluminum shift fork. Works okay for now, but I'll
upgrade to a cast iron fork if it gets too sloppy.
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Might think about converting it over to cable operation:
> http://4x4posi-lok.com/jeep_page.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Foot Loose wrote:
>
>>The shift motor is leaking causing vacuum to be present at the switch all
>>the time. Looks like I'll be getting a new motor.
>>
>>Thanks for all the answers you guys rock
>>
>>Scott
>>90YJ
#22
Guest
Posts: n/a
Re: 4WD light
Good advice.
If you don't want to buy the kit, it's pretty easy to rig up a cable
pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
small hose clamp, and four nuts:
http://xjeep.dyndns.org/posilok
I reused the crap aluminum shift fork. Works okay for now, but I'll
upgrade to a cast iron fork if it gets too sloppy.
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Might think about converting it over to cable operation:
> http://4x4posi-lok.com/jeep_page.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Foot Loose wrote:
>
>>The shift motor is leaking causing vacuum to be present at the switch all
>>the time. Looks like I'll be getting a new motor.
>>
>>Thanks for all the answers you guys rock
>>
>>Scott
>>90YJ
If you don't want to buy the kit, it's pretty easy to rig up a cable
pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
small hose clamp, and four nuts:
http://xjeep.dyndns.org/posilok
I reused the crap aluminum shift fork. Works okay for now, but I'll
upgrade to a cast iron fork if it gets too sloppy.
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Might think about converting it over to cable operation:
> http://4x4posi-lok.com/jeep_page.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Foot Loose wrote:
>
>>The shift motor is leaking causing vacuum to be present at the switch all
>>the time. Looks like I'll be getting a new motor.
>>
>>Thanks for all the answers you guys rock
>>
>>Scott
>>90YJ
#23
Guest
Posts: n/a
Re: 4WD light
Bookmarked: http://www.----------.com/jeep_bookmark.htm Under Jeep,
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
#24
Guest
Posts: n/a
Re: 4WD light
Bookmarked: http://www.----------.com/jeep_bookmark.htm Under Jeep,
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
#25
Guest
Posts: n/a
Re: 4WD light
Bookmarked: http://www.----------.com/jeep_bookmark.htm Under Jeep,
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
YJ, which explains why I lost it.
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
#26
Guest
Posts: n/a
Re: 4WD light
What kind of webpage image viewer is that?
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
#27
Guest
Posts: n/a
Re: 4WD light
What kind of webpage image viewer is that?
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
#28
Guest
Posts: n/a
Re: 4WD light
What kind of webpage image viewer is that?
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
Been looking for something for mine...looks pretty slick!
"Steve" <xjlifter@bogus.com> wrote in message
news:azp6d.73989$vO1.402760@nnrp1.uunet.ca...
> Good advice.
>
> If you don't want to buy the kit, it's pretty easy to rig up a cable
> pull yourself. I used an old PTO cable, a scrap of plate, a bolt, a
> small hose clamp, and four nuts:
>
> http://xjeep.dyndns.org/posilok
>
> I reused the crap aluminum shift fork. Works okay for now, but I'll
> upgrade to a cast iron fork if it gets too sloppy.
>
> Steve
> http://xjeep.dyndns.org
>
> L.W.(ßill) ------ III wrote:
> > Might think about converting it over to cable operation:
> > http://4x4posi-lok.com/jeep_page.html
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Foot Loose wrote:
> >
> >>The shift motor is leaking causing vacuum to be present at the switch
all
> >>the time. Looks like I'll be getting a new motor.
> >>
> >>Thanks for all the answers you guys rock
> >>
> >>Scott
> >>90YJ
#29
Guest
Posts: n/a
Re: 4WD light
Slicker than snot:
http://jalbum.net/
Steve
http://xjeep.dyndns.org
SteveBrady wrote:
> What kind of webpage image viewer is that?
> Been looking for something for mine...looks pretty slick!
http://jalbum.net/
Steve
http://xjeep.dyndns.org
SteveBrady wrote:
> What kind of webpage image viewer is that?
> Been looking for something for mine...looks pretty slick!
#30
Guest
Posts: n/a
Re: 4WD light
Slicker than snot:
http://jalbum.net/
Steve
http://xjeep.dyndns.org
SteveBrady wrote:
> What kind of webpage image viewer is that?
> Been looking for something for mine...looks pretty slick!
http://jalbum.net/
Steve
http://xjeep.dyndns.org
SteveBrady wrote:
> What kind of webpage image viewer is that?
> Been looking for something for mine...looks pretty slick!