4WD light
09-28-2004, 11:50 AM
#2
Guest
Posts: n/a
Re: 4WD light
I 'think' the switch is on the firewall with only one vacuum line going
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
09-28-2004, 11:50 AM
#3
Guest
Posts: n/a
Re: 4WD light
I 'think' the switch is on the firewall with only one vacuum line going
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
09-28-2004, 11:50 AM
#4
Guest
Posts: n/a
Re: 4WD light
I 'think' the switch is on the firewall with only one vacuum line going
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
to it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Foot Loose wrote:
>
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
09-28-2004, 01:11 PM
#5
Guest
Posts: n/a
Re: 4WD light
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the
> transfer case have been blown out with a air gun. What causes the
> light to light. Thanks in advance for any advice.
>
> Scott
> 90YJ
The switch that controls that light is a combonation vacuum/electrical
switch. It is on the firewall next to the battery. It has one vacuum line
attached to it. Two wires come out of the bottom. One is a ground, the other
goes to the dash.
More then likely, the switch is bad, but you might want to make sure it has
a good ground.
My brother and I both have the same problem. It does not intefer with the
operation of the 4-wd system.
09-28-2004, 01:11 PM
#6
Guest
Posts: n/a
Re: 4WD light
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the
> transfer case have been blown out with a air gun. What causes the
> light to light. Thanks in advance for any advice.
>
> Scott
> 90YJ
The switch that controls that light is a combonation vacuum/electrical
switch. It is on the firewall next to the battery. It has one vacuum line
attached to it. Two wires come out of the bottom. One is a ground, the other
goes to the dash.
More then likely, the switch is bad, but you might want to make sure it has
a good ground.
My brother and I both have the same problem. It does not intefer with the
operation of the 4-wd system.
09-28-2004, 01:11 PM
#7
Guest
Posts: n/a
Re: 4WD light
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the
> transfer case have been blown out with a air gun. What causes the
> light to light. Thanks in advance for any advice.
>
> Scott
> 90YJ
The switch that controls that light is a combonation vacuum/electrical
switch. It is on the firewall next to the battery. It has one vacuum line
attached to it. Two wires come out of the bottom. One is a ground, the other
goes to the dash.
More then likely, the switch is bad, but you might want to make sure it has
a good ground.
My brother and I both have the same problem. It does not intefer with the
operation of the 4-wd system.
09-28-2004, 01:30 PM
#8
Guest
Posts: n/a
Re: 4WD light
The swtich for the light on a '90 is on the firewall, in '91 the switch
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
09-28-2004, 01:30 PM
#9
Guest
Posts: n/a
Re: 4WD light
The swtich for the light on a '90 is on the firewall, in '91 the switch
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
09-28-2004, 01:30 PM
#10
Guest
Posts: n/a
Re: 4WD light
The swtich for the light on a '90 is on the firewall, in '91 the switch
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
is moved to the actuator on the axle. The older style has 3 vacumn lines
on the actuator, the newer style has 2 vac lines and 1 wire. The older
style is triggered off manifold vac when the axle is physically locked.
I generally find that more often the switch is good, but that you are
likely to have the axle stuck in the engaged position. This is NOT the
same as stuck in 4wd since the transfer case goes to 2wd.
You can check things out by pulling the line off the axle and checking
to see if the yellow and green lines have alternating vac when you shift
between 2wd & 4wd.
Don't be surprised if either a vac line to the transfer case or the vac
switch on the transfer case are bad. $35 and $16 to fix.
Foot Loose wrote:
> My 4WD light will not go out on my 90YJ, the vacuum lines from the transfer
> case have been blown out with a air gun. What causes the light to light.
> Thanks in advance for any advice.
>
> Scott
> 90YJ
>
>
