4 low not engaging
Guest
Posts: n/a
Re: 4 low not engaging
You're just nasty. That's a good quality for a girl.
"jbjeep" <jbjeep@saw.net> wrote in message
news:0ddpv2l83j7fuj5108tfi9n0ose7anudj4@4ax.com...
> Baaaaaaad, Jeff, baaaaaaaad.
>
> -jenn
>
>
> On Sun, 18 Mar 2007 01:36:02 GMT, "Jeff Strickland" <crwlr@verizon.net>
> wrote:
>
>>>Hey Mike,
>>>Is this one of the Jeeps where the shifter would strike the tub? If so,
>>>then
>>>all that may be needed is to pull the shifter boot up and cut the sheep
>>>metal back a little.
>>>
>>>Wait, maybe that fix is for the transmission shifter, and its ability to
>>>strike the tub when 2nd gear is selected.
>>>
>>>
>>>
>>>
>>>"Mike Romain" <romainm@sympatico.ca> wrote in message
>>>news:45fc05ab$0$31581$9a6e19ea@unlimited.newsho sting.com...
>>>> It is theoretically adjustable depending on how insane the amount of
>>>> the
>>>> 'body' part of the lift is...
>>>>
>>>> If the body has been lifted, then it might need a linkage extension
>>>> that
>>>> usually comes with the kit.
>>>>
>>>> Other than that, you just go under, loosen the linkage set bolt, put
>>>> the
>>>> shifter into 4 low with a 1/8" drill bit as a spacer from the lever
>>>> stop
>>>> plate up top, set the t-case to 4 low and tighten the adjuster.
>>>>
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>>
>>>> baltork@hotmail.com wrote:
>>>>> I had a 4" lift put on my '97 wrangler about a year ago. The guy that
>>>>> put it on was a friend of a friend and lives really far out of town.
>>>>> His dad actually runs a mud-sling competition and he works on all
>>>>> kinds of jacked up mud mobiles and he did a good job with the install.
>>>>> The only thing wrong is that now the 4 low doesn't engage. He said he
>>>>> talked to the lift manufacturer and it was just a small adjustment
>>>>> that needed to be made, but I have since moved and lost contact with
>>>>> this guy. Any ideas of what may be wrong so that I could attempt to
>>>>> repair this myself?
>>>>>
"jbjeep" <jbjeep@saw.net> wrote in message
news:0ddpv2l83j7fuj5108tfi9n0ose7anudj4@4ax.com...
> Baaaaaaad, Jeff, baaaaaaaad.
>
> -jenn
>
>
> On Sun, 18 Mar 2007 01:36:02 GMT, "Jeff Strickland" <crwlr@verizon.net>
> wrote:
>
>>>Hey Mike,
>>>Is this one of the Jeeps where the shifter would strike the tub? If so,
>>>then
>>>all that may be needed is to pull the shifter boot up and cut the sheep
>>>metal back a little.
>>>
>>>Wait, maybe that fix is for the transmission shifter, and its ability to
>>>strike the tub when 2nd gear is selected.
>>>
>>>
>>>
>>>
>>>"Mike Romain" <romainm@sympatico.ca> wrote in message
>>>news:45fc05ab$0$31581$9a6e19ea@unlimited.newsho sting.com...
>>>> It is theoretically adjustable depending on how insane the amount of
>>>> the
>>>> 'body' part of the lift is...
>>>>
>>>> If the body has been lifted, then it might need a linkage extension
>>>> that
>>>> usually comes with the kit.
>>>>
>>>> Other than that, you just go under, loosen the linkage set bolt, put
>>>> the
>>>> shifter into 4 low with a 1/8" drill bit as a spacer from the lever
>>>> stop
>>>> plate up top, set the t-case to 4 low and tighten the adjuster.
>>>>
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>>
>>>> baltork@hotmail.com wrote:
>>>>> I had a 4" lift put on my '97 wrangler about a year ago. The guy that
>>>>> put it on was a friend of a friend and lives really far out of town.
>>>>> His dad actually runs a mud-sling competition and he works on all
>>>>> kinds of jacked up mud mobiles and he did a good job with the install.
>>>>> The only thing wrong is that now the 4 low doesn't engage. He said he
>>>>> talked to the lift manufacturer and it was just a small adjustment
>>>>> that needed to be made, but I have since moved and lost contact with
>>>>> this guy. Any ideas of what may be wrong so that I could attempt to
>>>>> repair this myself?
>>>>>
Guest
Posts: n/a
Re: 4 low not engaging
You're just nasty. That's a good quality for a girl.
"jbjeep" <jbjeep@saw.net> wrote in message
news:0ddpv2l83j7fuj5108tfi9n0ose7anudj4@4ax.com...
> Baaaaaaad, Jeff, baaaaaaaad.
>
> -jenn
>
>
> On Sun, 18 Mar 2007 01:36:02 GMT, "Jeff Strickland" <crwlr@verizon.net>
> wrote:
>
>>>Hey Mike,
>>>Is this one of the Jeeps where the shifter would strike the tub? If so,
>>>then
>>>all that may be needed is to pull the shifter boot up and cut the sheep
>>>metal back a little.
>>>
>>>Wait, maybe that fix is for the transmission shifter, and its ability to
>>>strike the tub when 2nd gear is selected.
>>>
>>>
>>>
>>>
>>>"Mike Romain" <romainm@sympatico.ca> wrote in message
>>>news:45fc05ab$0$31581$9a6e19ea@unlimited.newsho sting.com...
>>>> It is theoretically adjustable depending on how insane the amount of
>>>> the
>>>> 'body' part of the lift is...
>>>>
>>>> If the body has been lifted, then it might need a linkage extension
>>>> that
>>>> usually comes with the kit.
>>>>
>>>> Other than that, you just go under, loosen the linkage set bolt, put
>>>> the
>>>> shifter into 4 low with a 1/8" drill bit as a spacer from the lever
>>>> stop
>>>> plate up top, set the t-case to 4 low and tighten the adjuster.
>>>>
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>>
>>>> baltork@hotmail.com wrote:
>>>>> I had a 4" lift put on my '97 wrangler about a year ago. The guy that
>>>>> put it on was a friend of a friend and lives really far out of town.
>>>>> His dad actually runs a mud-sling competition and he works on all
>>>>> kinds of jacked up mud mobiles and he did a good job with the install.
>>>>> The only thing wrong is that now the 4 low doesn't engage. He said he
>>>>> talked to the lift manufacturer and it was just a small adjustment
>>>>> that needed to be made, but I have since moved and lost contact with
>>>>> this guy. Any ideas of what may be wrong so that I could attempt to
>>>>> repair this myself?
>>>>>
"jbjeep" <jbjeep@saw.net> wrote in message
news:0ddpv2l83j7fuj5108tfi9n0ose7anudj4@4ax.com...
> Baaaaaaad, Jeff, baaaaaaaad.
>
> -jenn
>
>
> On Sun, 18 Mar 2007 01:36:02 GMT, "Jeff Strickland" <crwlr@verizon.net>
> wrote:
>
>>>Hey Mike,
>>>Is this one of the Jeeps where the shifter would strike the tub? If so,
>>>then
>>>all that may be needed is to pull the shifter boot up and cut the sheep
>>>metal back a little.
>>>
>>>Wait, maybe that fix is for the transmission shifter, and its ability to
>>>strike the tub when 2nd gear is selected.
>>>
>>>
>>>
>>>
>>>"Mike Romain" <romainm@sympatico.ca> wrote in message
>>>news:45fc05ab$0$31581$9a6e19ea@unlimited.newsho sting.com...
>>>> It is theoretically adjustable depending on how insane the amount of
>>>> the
>>>> 'body' part of the lift is...
>>>>
>>>> If the body has been lifted, then it might need a linkage extension
>>>> that
>>>> usually comes with the kit.
>>>>
>>>> Other than that, you just go under, loosen the linkage set bolt, put
>>>> the
>>>> shifter into 4 low with a 1/8" drill bit as a spacer from the lever
>>>> stop
>>>> plate up top, set the t-case to 4 low and tighten the adjuster.
>>>>
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>>
>>>> baltork@hotmail.com wrote:
>>>>> I had a 4" lift put on my '97 wrangler about a year ago. The guy that
>>>>> put it on was a friend of a friend and lives really far out of town.
>>>>> His dad actually runs a mud-sling competition and he works on all
>>>>> kinds of jacked up mud mobiles and he did a good job with the install.
>>>>> The only thing wrong is that now the 4 low doesn't engage. He said he
>>>>> talked to the lift manufacturer and it was just a small adjustment
>>>>> that needed to be made, but I have since moved and lost contact with
>>>>> this guy. Any ideas of what may be wrong so that I could attempt to
>>>>> repair this myself?
>>>>>
Thread
Thread Starter
Forum
Replies
Last Post
mebeka@hotmail.com
Jeep Mailing List
6
Dec 3, 2006 01:18 PM
Donny
Jeep Mailing List
36
Feb 12, 2004 01:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
