4" Full Traction Lift LHD/RHD
06-09-2004, 12:41 PM
#1
Guest
Posts: n/a
4" Full Traction Lift LHD/RHD
Hi,
If I purchased a 4" full traction lift kit from the US would
their be any problems fitting it to a RHD UK TJ. Looking at the
photo's for the kit contents it looks like the adjustable front track
bar is a none handed item. The only bracket that looks to be handed
is the rear track bar bracket but I am assuming this would be on the
same side for LHD or RHD as it is not steering related. In the worst
case though I could just get a mirror image bracket fabricated.
Any info or thoughts will be appreciated.
Cheers
Nick
If I purchased a 4" full traction lift kit from the US would
their be any problems fitting it to a RHD UK TJ. Looking at the
photo's for the kit contents it looks like the adjustable front track
bar is a none handed item. The only bracket that looks to be handed
is the rear track bar bracket but I am assuming this would be on the
same side for LHD or RHD as it is not steering related. In the worst
case though I could just get a mirror image bracket fabricated.
Any info or thoughts will be appreciated.
Cheers
Nick
06-09-2004, 01:22 PM
#2
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
06-09-2004, 01:22 PM
#3
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
06-09-2004, 01:22 PM
#4
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
06-09-2004, 01:22 PM
#5
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick
06-10-2004, 01:36 AM
#6
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
does the company make a lhd kit????
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
06-10-2004, 01:36 AM
#7
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
does the company make a lhd kit????
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
06-10-2004, 01:36 AM
#8
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
does the company make a lhd kit????
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
06-10-2004, 01:36 AM
#9
Guest
Posts: n/a
Re: 4" Full Traction Lift LHD/RHD
does the company make a lhd kit????
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C74738.77C393C2@***.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick