4" Full Traction Lift LHD/RHD
 

Hi,
If I purchased a 4" full traction lift kit from the US would
their be any problems fitting it to a RHD UK TJ. Looking at the
photo's for the kit contents it looks like the adjustable front track
bar is a none handed item. The only bracket that looks to be handed
is the rear track bar bracket but I am assuming this would be on the
same side for LHD or RHD as it is not steering related. In the worst
case though I could just get a mirror image bracket fabricated.


Any info or thoughts will be appreciated.

Cheers
Nick

Re: 4" Full Traction Lift LHD/RHD
 

The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick

Re: 4" Full Traction Lift LHD/RHD
 

The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick

Re: 4" Full Traction Lift LHD/RHD
 

The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick

Re: 4" Full Traction Lift LHD/RHD
 

The track bar lays flat in the parts picture, so I would bet come
in from the other side wouldn't make any difference:
http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
problem trying to get around the pumpkin:
http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
would give it clearance.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nick wrote:
>
> Hi,
> If I purchased a 4" full traction lift kit from the US would
> their be any problems fitting it to a RHD UK TJ. Looking at the
> photo's for the kit contents it looks like the adjustable front track
> bar is a none handed item. The only bracket that looks to be handed
> is the rear track bar bracket but I am assuming this would be on the
> same side for LHD or RHD as it is not steering related. In the worst
> case though I could just get a mirror image bracket fabricated.
>
> Any info or thoughts will be appreciated.
>
> Cheers
> Nick

Re: 4" Full Traction Lift LHD/RHD
 

does the company make a lhd kit????

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40C74738.77C393C2@cox.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick

Re: 4" Full Traction Lift LHD/RHD
 

does the company make a lhd kit????

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40C74738.77C393C2@cox.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick

Re: 4" Full Traction Lift LHD/RHD
 

does the company make a lhd kit????

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40C74738.77C393C2@cox.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick

Re: 4" Full Traction Lift LHD/RHD
 

does the company make a lhd kit????

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40C74738.77C393C2@cox.net...
> The track bar lays flat in the parts picture, so I would bet come
> in from the other side wouldn't make any difference:
> http://www.4x4wire.com/news/fts/7505kit.jpg Although there could be a
> problem trying to get around the pumpkin:
> http://www.cowtownjeeps.com/tech/FrontSusp.jpg Probably just bending it
> would give it clearance.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nick wrote:
> >
> > Hi,
> > If I purchased a 4" full traction lift kit from the US would
> > their be any problems fitting it to a RHD UK TJ. Looking at the
> > photo's for the kit contents it looks like the adjustable front track
> > bar is a none handed item. The only bracket that looks to be handed
> > is the rear track bar bracket but I am assuming this would be on the
> > same side for LHD or RHD as it is not steering related. In the worst
> > case though I could just get a mirror image bracket fabricated.
> >
> > Any info or thoughts will be appreciated.
> >
> > Cheers
> > Nick

Re: 4" Full Traction Lift LHD/RHD
 

I was assuming the kit had a left hand drive bias because it was made
for the American market.



On Wed, 9 Jun 2004 22:36:14 -0700, "Carlo" <carlo.jr@comcast.net>
wrote:

>does the company make a lhd kit????