4.0L header
#11
Guest
Posts: n/a
Re: 4.0L header
Doug,
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
#12
Guest
Posts: n/a
Re: 4.0L header
Doug,
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
#13
Guest
Posts: n/a
Re: 4.0L header
Doug,
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
Did you install and run the header before your supercharger? How did you
like it? Did it change anything (power/mileage/sound/anything?)
Carl
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:cWiCi.95128$Vk6.44835@newsfe07.phx...
>c wrote:
>> Carl S wrote:
>>> Guys,
>>>
>>> What are your thoughts on this header for my 00 XJ 4.0L?
>>>
>>> http://tinyurl.com/2qvdeo
>>>
>>> For $155, it looks too good to be true.
>
>
>> I "think" that is the same guy a few of my buddies buy headers from
>> for their demo derby cars. I know he is in Iowa. If it is the same
>> guy, then I would tell you that his stuff is decent. They buy small block
>> Chevy
>> headers (the type that stick straight up out the hood) for about $150
>> a pair. They are nothing fancy, but the welding and bending are good
>> quality. I will try to find out if this is the same guy and post back
>> here.
>
> That looks like a dead ringer for my Banks header.
> http://revbeergoggles.com/banks/images/headerfits.jpg
>
> I did have to do a bit of grinding on the motor mount to get
> it to clear.
>
> --
> DougW
>
#14
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
#15
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
#16
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
#17
Guest
Posts: n/a
Re: 4.0L header
Carl S wrote:
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
> Doug,
>
> Did you install and run the header before your supercharger? How
> did you like it? Did it change anything
> (power/mileage/sound/anything?)
Installed it after. The old exhaust header cracked at one of the
unions and was starting to crack on the #6 pipe where most others
do.
The sound changed, as for power/milage it's hard to tell. The stock
manifold is actually fairly good.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
David C. Moller
Jeep Mailing List
4
09-16-2003 02:07 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)