33s and 4.10s
#111
Guest
Posts: n/a
Re: 33s and 4.10s
33" diameter, times Pi (3.14159) for the circumference, times .01
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
#112
Guest
Posts: n/a
Re: 33s and 4.10s
33" diameter, times Pi (3.14159) for the circumference, times .01
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
#113
Guest
Posts: n/a
Re: 33s and 4.10s
33" diameter, times Pi (3.14159) for the circumference, times .01
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
equals the change in inches.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
RoyJ wrote:
>
> Back to school Bill.
>
> L.W.(ßill) ------ III wrote:
> > One inch.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > jeff wrote:
> >
> >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion, and
> >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference with
> >>33s. Close enough.
> >>
> >>--
> >>jeff
#114
Guest
Posts: n/a
Re: 33s and 4.10s
no, 33 x pi = 103.67" for the circumference.
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
#115
Guest
Posts: n/a
Re: 33s and 4.10s
no, 33 x pi = 103.67" for the circumference.
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
#116
Guest
Posts: n/a
Re: 33s and 4.10s
no, 33 x pi = 103.67" for the circumference.
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
#117
Guest
Posts: n/a
Re: 33s and 4.10s
no, 33 x pi = 103.67" for the circumference.
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
as Jeff said.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42E170EE.E99C11F1@***.net...
> 33" diameter, times Pi (3.14159) for the circumference, times .01
> equals the change in inches.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RoyJ wrote:
> >
> > Back to school Bill.
> >
> > L.W.(ßill) ------ III wrote:
> > > One inch.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > jeff wrote:
> > >
> > >>A 4.10 gear set has 41 teeth on the ring and 10 teeth on the pinion,
and
> > >>a 4.11 has 37 and 9. Roughly a 1/4"/rev rolling distance difference
with
> > >>33s. Close enough.
> > >>
> > >>--
> > >>jeff
#118
Guest
Posts: n/a
Re: 33s and 4.10s
Right. Somehow I jumped to .01 as being one percent.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.
#119
Guest
Posts: n/a
Re: 33s and 4.10s
Right. Somehow I jumped to .01 as being one percent.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.
#120
Guest
Posts: n/a
Re: 33s and 4.10s
Right. Somehow I jumped to .01 as being one percent.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> no, 33 x pi = 103.67" for the circumference.
> Difference is between 4.11 and 4.10, so multiply that by 0.01/4.11 = 0.25"
> as Jeff said.