258 YJ with rough idle
10-21-2006, 10:20 PM
#1
Guest
Posts: n/a
258 YJ with rough idle
I've seen this mentioned a few times on this forum as a possible
diagnosis for a poster with a rough idle complaint, but have yet to
find the solution... According to previous posts, it's "pretty easy"...
But again, no one's mentioned the easy solution.
258 with a slightly rough idle and oil blowing into the air cleaner.
Suggestions/ideas? Do I just need to find a good breather filter?
diagnosis for a poster with a rough idle complaint, but have yet to
find the solution... According to previous posts, it's "pretty easy"...
But again, no one's mentioned the easy solution.
258 with a slightly rough idle and oil blowing into the air cleaner.
Suggestions/ideas? Do I just need to find a good breather filter?
10-21-2006, 10:57 PM
#2
Guest
Posts: n/a
Re: 258 YJ with rough idle
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
10-21-2006, 10:57 PM
#3
Guest
Posts: n/a
Re: 258 YJ with rough idle
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
10-21-2006, 10:57 PM
#4
Guest
Posts: n/a
Re: 258 YJ with rough idle
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?
10-22-2006, 02:04 AM
#8
Guest
Posts: n/a
Re: 258 YJ with rough idle
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.
10-22-2006, 02:04 AM
#9
Guest
Posts: n/a
Re: 258 YJ with rough idle
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.
10-22-2006, 02:04 AM
#10
Guest
Posts: n/a
Re: 258 YJ with rough idle
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.