Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   258 YJ with rough idle (https://www.jeepscanada.com/jeep-mailing-list-32/258-yj-rough-idle-41634/)

Micah 10-21-2006 10:20 PM

258 YJ with rough idle
 
I've seen this mentioned a few times on this forum as a possible
diagnosis for a poster with a rough idle complaint, but have yet to
find the solution... According to previous posts, it's "pretty easy"...
But again, no one's mentioned the easy solution.

258 with a slightly rough idle and oil blowing into the air cleaner.
Suggestions/ideas? Do I just need to find a good breather filter?


L.W.(Bill) Hughes III 10-21-2006 10:57 PM

Re: 258 YJ with rough idle
 
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?


L.W.(Bill) Hughes III 10-21-2006 10:57 PM

Re: 258 YJ with rough idle
 
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?


L.W.(Bill) Hughes III 10-21-2006 10:57 PM

Re: 258 YJ with rough idle
 
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> I've seen this mentioned a few times on this forum as a possible
> diagnosis for a poster with a rough idle complaint, but have yet to
> find the solution... According to previous posts, it's "pretty easy"...
> But again, no one's mentioned the easy solution.
>
> 258 with a slightly rough idle and oil blowing into the air cleaner.
> Suggestions/ideas? Do I just need to find a good breather filter?


Micah 10-22-2006 01:40 AM

Re: 258 YJ with rough idle
 
i should have known. it always comes back to that one page. thanks.


Micah 10-22-2006 01:40 AM

Re: 258 YJ with rough idle
 
i should have known. it always comes back to that one page. thanks.


Micah 10-22-2006 01:40 AM

Re: 258 YJ with rough idle
 
i should have known. it always comes back to that one page. thanks.


L.W.(Bill) Hughes III 10-22-2006 02:04 AM

Re: 258 YJ with rough idle
 
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.


L.W.(Bill) Hughes III 10-22-2006 02:04 AM

Re: 258 YJ with rough idle
 
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.


L.W.(Bill) Hughes III 10-22-2006 02:04 AM

Re: 258 YJ with rough idle
 
Yes, it is very well written. You might check to see if your Mickey
Mouse solenoid controlled orifice has been modify to use a Positive
Crankcase Venation valve like they converted to:
http://home.sprynet.com/~dale02/aircl.htm#pcv That's the part that must
clog for the blow-by to happen in the normally vacuum vent hose to the
air cleaner.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Micah wrote:
>
> i should have known. it always comes back to that one page. thanks.



All times are GMT -4. The time now is 10:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.07162 seconds with 8 queries