2000 TJ Rear Seat Belt Retractor Problem
#31
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
Same thing happened to me, But when I bolted then back onto the
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
#32
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
Same thing happened to me, But when I bolted then back onto the
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
#33
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
Same thing happened to me, But when I bolted then back onto the
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
roll bar (the seat belt assembly) it mystically started working, must
be something internal to the unit of just FM.
L8r - Jersey
"DougW" <post.replies@invalid.address> wrote in message news:CXlic.65403$ec1.39158@okepread01...
> JeePenn did pass the time by typing:
> > I removed my rear seat belt retractors to install a tire carrier that
> > required me to temporarily remove the retractors. The driver side retractor
> > has taken up all the loose belt and I can not pull the belt out to reinstall
> > the retractor into the roll bar. What do I do to release the belt? Many
> > thanks!
>
> Tried tugging it sharply a couple of times?
>
> Some retractors have an impact lock mechanisim that's
> based on the retractor being in a certain orentation.
> Try holding it like it should go in and tugging the belt.
>
> (just a guess, been a while since I worked on one like that)
>
> --
> DougW
>
>
#34
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
hold it as level as you can while pulling on the belt
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
#35
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
hold it as level as you can while pulling on the belt
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
#36
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
hold it as level as you can while pulling on the belt
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
#37
Guest
Posts: n/a
Re: 2000 TJ Rear Seat Belt Retractor Problem
hold it as level as you can while pulling on the belt
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
JeePenn wrote:
> I removed my rear seat belt retractors to install a tire carrier that
> required me to temporarily remove the retractors. The driver side retractor
> has taken up all the loose belt and I can not pull the belt out to reinstall
> the retractor into the roll bar. What do I do to release the belt? Many
> thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)