2000 TJ Rear Dana 35C to Dana 44 Swap
Guest
Posts: n/a
2000 TJ Rear Dana 35C to Dana 44 Swap
Hi,
Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
one-for-one r/r or are there other items that need to be swapped (drive
shaft, control arms, shocks, other? ). Would like to be able to start this
change know that I have everything needed to finish.
Thanks,
MJ
Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
one-for-one r/r or are there other items that need to be swapped (drive
shaft, control arms, shocks, other? ). Would like to be able to start this
change know that I have everything needed to finish.
Thanks,
MJ
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
I would bet the only thing to change would be the driveshaft,
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
I would bet the only thing to change would be the driveshaft,
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
I would bet the only thing to change would be the driveshaft,
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
because the 44's pinion is longer.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
John Q Public wrote:
>
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana 44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
is negated. If your TJ is lifted, the slightly longer driveshaft of the
Dana 35c equipped TJ will be perfect for the new Dana 44.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"John Q Public" <ccodder396@yahoo.com> wrote in message
news:EJMvb.277228$Tr4.851141@attbi_s03...
> Hi,
>
> Want to change the rear in my 2000 TJ from a Dana 35C with 3.73 to a Dana
44
> with 3.73 and trac-loc. The Dana 44 going in is from a 2002 TJ. Is this a
> one-for-one r/r or are there other items that need to be swapped (drive
> shaft, control arms, shocks, other? ). Would like to be able to start this
> change know that I have everything needed to finish.
>
> Thanks,
> MJ
>
>
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
In article <C0Nvb.5227$Bk1.3424@fed1read05>, "Jerry Bransford"
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
In article <C0Nvb.5227$Bk1.3424@fed1read05>, "Jerry Bransford"
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
Guest
Posts: n/a
Re: 2000 TJ Rear Dana 35C to Dana 44 Swap
In article <C0Nvb.5227$Bk1.3424@fed1read05>, "Jerry Bransford"
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
<jerrypb@mecox.net> writes:
>It's a direct bolt-in, nothing changes. Trackbar, anti-swaybar, shocks,
>etc. all bolt to the D44 without mods. Since your TJ is likely lifted, that
>the longer-nosed Dana 44 normally would need a slightly shorter driveshaft
>is negated. If your TJ is lifted, the slightly longer driveshaft of the
>Dana 35c equipped TJ will be perfect for the new Dana 44.
>
Might I add if your TJ has ABS, you will have to disable it as ABS was not
available on a factory Dana 44.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
