1996 Cherokee 4.0 I6 timing mark. ??
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
<post.replies@invalid.address> wrote:
>bllsht wrote:
>
>> Or, ask DougW. He will tell you it's there.
>
>Yep.
>
>Hard to see though. It's hiding below the water pump.
>
>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
Guys .. Hey... I believe you (sounds lke some threads in the Dodge
group .. :). After looking the situation over, I didn't need the
mark, anyway.
Bllsht's post:
"The trailing edge of the rotor should be just PAST the #1 terminal at
TDC."
That post saved the day for me. When I put it in the first time I
centered the tower and it ran like crap. I thought I remembered about
the trailing edge .. re-checked the posts.. and set it like Bllsht
said. That cleaned it right up.
Thanks Bllsht!! :)
"Leroy"
<post.replies@invalid.address> wrote:
>bllsht wrote:
>
>> Or, ask DougW. He will tell you it's there.
>
>Yep.
>
>Hard to see though. It's hiding below the water pump.
>
>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
Guys .. Hey... I believe you (sounds lke some threads in the Dodge
group .. :). After looking the situation over, I didn't need the
mark, anyway.
Bllsht's post:
"The trailing edge of the rotor should be just PAST the #1 terminal at
TDC."
That post saved the day for me. When I put it in the first time I
centered the tower and it ran like crap. I thought I remembered about
the trailing edge .. re-checked the posts.. and set it like Bllsht
said. That cleaned it right up.
Thanks Bllsht!! :)
"Leroy"
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
Even a timing notch on the vibration damper that aligns with the
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
Even a timing notch on the vibration damper that aligns with the
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
Even a timing notch on the vibration damper that aligns with the
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
modestly well hidden timing scale. A good bendable mirror and you can
see it with everything installed. Not that the timing is adjustable
other than with the engine controller.
DougW proclaimed:
> bllsht wrote:
>
>
>>Or, ask DougW. He will tell you it's there.
>
>
> Yep.
>
> Hard to see though. It's hiding below the water pump.
>
> http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
> http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
On Sun, 11 Mar 2007 17:35:59 -0500, Leroy <DodgemanFromHell@aol.com>
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
On Sun, 11 Mar 2007 17:35:59 -0500, Leroy <DodgemanFromHell@aol.com>
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
On Sun, 11 Mar 2007 17:35:59 -0500, Leroy <DodgemanFromHell@aol.com>
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
wrote:
>On Sun, 11 Mar 2007 15:41:03 -0500, "DougW"
><post.replies@invalid.address> wrote:
>
>>bllsht wrote:
>>
>>> Or, ask DougW. He will tell you it's there.
>>
>>Yep.
>>
>>Hard to see though. It's hiding below the water pump.
>>
>>http://www.revbeergoggles.com/temp/4.0-timingmark.jpg
>>http://www.revbeergoggles.com/temp/4.0-timingmark2.jpg
>
>
>Guys .. Hey... I believe you (sounds lke some threads in the Dodge
>group .. :). After looking the situation over, I didn't need the
>mark, anyway.
>
>Bllsht's post:
>"The trailing edge of the rotor should be just PAST the #1 terminal at
>TDC."
>
>That post saved the day for me. When I put it in the first time I
>centered the tower and it ran like crap. I thought I remembered about
>the trailing edge .. re-checked the posts.. and set it like Bllsht
>said. That cleaned it right up.
>
>Thanks Bllsht!! :)
>
>"Leroy"
You're welcome. Glad you got it handled.
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
bllsht wrote:
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
bllsht wrote:
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
Guest
Posts: n/a
Re: 1996 Cherokee 4.0 I6 timing mark. ??
bllsht wrote:
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
> That picture was the only one I could find, and it's not a 4.0L, but
> it was meant to indicate loacation, and that's what it does. It may
> not look exactly the same, and it's hard to see with the serpentine
> belt in the way, but it is there whether YOU can see it or not.
>
Well you are right, I went out and looked again and still had no marks
so I took a scraper to the area and sure enough, the marks are down
there under the mud and crud. Mine have never been cleaned because they
aren't used normally.
Mike
