1993 GC Limited - I Miss My Jeep!!
#141
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
>"DougW" was heard to say...
>
>The hood pull is just a few bolts.
>The only hard part is if the cable breaks before you have the hood
>open. :)
I would imagine so. :)
Avalable after-market? Dealer is saying part is over $100. /sigh
>
>The hood pull is just a few bolts.
>The only hard part is if the cable breaks before you have the hood
>open. :)
I would imagine so. :)
Avalable after-market? Dealer is saying part is over $100. /sigh
#142
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Or a new vice grip handle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#143
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Or a new vice grip handle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#144
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Or a new vice grip handle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Casper wrote:
>
> >"DougW" was heard to say...
> >
> >The hood pull is just a few bolts.
> >The only hard part is if the cable breaks before you have the hood
> >open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#145
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Here are a few online sources, some local dealers will match prices.
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#146
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Here are a few online sources, some local dealers will match prices.
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#147
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Here are a few online sources, some local dealers will match prices.
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
http://www.chryslerpartsdirect.com/
http://www.trademotion.com/partlocat...?siteid=214295
http://jeeppartspeople.com/
http://allchryslerparts.com/
http://www.trademotion.com/partlocat...?siteid=214272
https://www.1stjeepparts.com/oe_parts_catalog.html
http://car-part.com/index.htm
"Casper" <casper@ghostmail.cc> wrote in message
news:pka9g2p5g1v15vmi06kl8cueegoncfkb0m@4ax.com...
> >"DougW" was heard to say...
>>
>>The hood pull is just a few bolts.
>>The only hard part is if the cable breaks before you have the hood
>>open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
#148
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Casper wrote:
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW
#149
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Casper wrote:
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW
#150
Guest
Posts: n/a
Re: 1993 GC Limited - I Miss My Jeep!!
Casper wrote:
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW
>> "DougW" was heard to say...
>>
>> The hood pull is just a few bolts.
>> The only hard part is if the cable breaks before you have the hood
>> open. :)
>
> I would imagine so. :)
> Avalable after-market? Dealer is saying part is over $100. /sigh
billy ray posted a lot of links. I'd start looking there.
Stick with OEM or check napaonline.com simply because the
"one size fits all" aftermarket tend to break.
When you check with a parts counter make sure they don't have
it as a sub-assembly. Sometimes they try to sell the whole assembly
when there are sub parts they can sell.
The other option is to gather the bits and try some Gorrilla Glue.
no kidding, that stuff is some insane glue. Used it to fix one of
my A/C *****. A little aluminum from a guiness can as a backer and
it's good as new again.
http://www.revbeergoggles.com/temp/knobface.jpg
http://www.revbeergoggles.com/temp/****--------
http://www.revbeergoggles.com/temp/****-guinness.jpg
Another option is ye olde junk yard. Try to find a rollover
or other ZJ up to 95. (I think)
--
DougW