1990 wrangler V8 swap question
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
Hi Randy,
Your have a 94" wheelbase for plenty of room. I don't see a problem
other than finding someone that'll SMOG a lawnmower. I don't know where
you would find information on wiring your computers, maybe swap
harnesses and everything.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
OctaviousMonk@optonline.net wrote:
>
> I have a 90 Sahara witha 4.2L engine that has just died on me. I am
> planning on doing a motor swap soon and I was looking for a 4.0L. Today
> however I got the option of picking up a 95 Grand Cherokee Laredo with
> the V8 and only 75k that was hit in the rear for only $500. I have done
> a ton of research and have all the info I need for the 4.0L swap, but I
> haven't been able to find much on this type of swap. Is it any more
> dificult then the 4.0 swap, what type of money am I loking at, or is it
> even worth it to do in the first place?
> Any info, sugestions, opinions or even a finger pointed in the right
> direction would be greatly appreciated.
> Thanks,
> Randy
Your have a 94" wheelbase for plenty of room. I don't see a problem
other than finding someone that'll SMOG a lawnmower. I don't know where
you would find information on wiring your computers, maybe swap
harnesses and everything.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
OctaviousMonk@optonline.net wrote:
>
> I have a 90 Sahara witha 4.2L engine that has just died on me. I am
> planning on doing a motor swap soon and I was looking for a 4.0L. Today
> however I got the option of picking up a 95 Grand Cherokee Laredo with
> the V8 and only 75k that was hit in the rear for only $500. I have done
> a ton of research and have all the info I need for the 4.0L swap, but I
> haven't been able to find much on this type of swap. Is it any more
> dificult then the 4.0 swap, what type of money am I loking at, or is it
> even worth it to do in the first place?
> Any info, sugestions, opinions or even a finger pointed in the right
> direction would be greatly appreciated.
> Thanks,
> Randy
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
Hi Randy,
Your have a 94" wheelbase for plenty of room. I don't see a problem
other than finding someone that'll SMOG a lawnmower. I don't know where
you would find information on wiring your computers, maybe swap
harnesses and everything.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
OctaviousMonk@optonline.net wrote:
>
> I have a 90 Sahara witha 4.2L engine that has just died on me. I am
> planning on doing a motor swap soon and I was looking for a 4.0L. Today
> however I got the option of picking up a 95 Grand Cherokee Laredo with
> the V8 and only 75k that was hit in the rear for only $500. I have done
> a ton of research and have all the info I need for the 4.0L swap, but I
> haven't been able to find much on this type of swap. Is it any more
> dificult then the 4.0 swap, what type of money am I loking at, or is it
> even worth it to do in the first place?
> Any info, sugestions, opinions or even a finger pointed in the right
> direction would be greatly appreciated.
> Thanks,
> Randy
Your have a 94" wheelbase for plenty of room. I don't see a problem
other than finding someone that'll SMOG a lawnmower. I don't know where
you would find information on wiring your computers, maybe swap
harnesses and everything.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
OctaviousMonk@optonline.net wrote:
>
> I have a 90 Sahara witha 4.2L engine that has just died on me. I am
> planning on doing a motor swap soon and I was looking for a 4.0L. Today
> however I got the option of picking up a 95 Grand Cherokee Laredo with
> the V8 and only 75k that was hit in the rear for only $500. I have done
> a ton of research and have all the info I need for the 4.0L swap, but I
> haven't been able to find much on this type of swap. Is it any more
> dificult then the 4.0 swap, what type of money am I loking at, or is it
> even worth it to do in the first place?
> Any info, sugestions, opinions or even a finger pointed in the right
> direction would be greatly appreciated.
> Thanks,
> Randy
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
The overhead cam Tornado was by Kaiser:
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
The overhead cam Tornado was by Kaiser:
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
The overhead cam Tornado was by Kaiser:
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
http://www.----------.com/temp/tornadoOHCengine2.jpg
http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
American wanted Real horsepower that only could be obtained via
pushrods.
God Bless America, Bill O|||||||O
mailto:--------------------
Spdloader wrote:
>
> Okay, let me rephrase, if we're going to be technical.
>
> Ford with Ford,
> Chevy with Chevy,
> and Jeep with whatever the factory bought from somewhere else to put in
> them.
>
> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> transmission.
>
> That was a bullet proof motor. Mine was, I'm not speaking for all of them,
> but I was told that it was a Pontiac design.
>
> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
Ahh, thank you sir!
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
Ahh, thank you sir!
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
Ahh, thank you sir!
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
I don't remember who told me it was Pontiac, but I honestly didn't know for
sure, just that mine was a good one.
Spdloader
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
>>
>> Okay, let me rephrase, if we're going to be technical.
>>
>> Ford with Ford,
>> Chevy with Chevy,
>> and Jeep with whatever the factory bought from somewhere else to put in
>> them.
>>
>> I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
>> transmission.
>>
>> That was a bullet proof motor. Mine was, I'm not speaking for all of
>> them,
>> but I was told that it was a Pontiac design.
>>
>> Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
So the F-head would have been the last "real Jeep" engine then?
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
> >
> > Okay, let me rephrase, if we're going to be technical.
> >
> > Ford with Ford,
> > Chevy with Chevy,
> > and Jeep with whatever the factory bought from somewhere else to put in
> > them.
> >
> > I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> > transmission.
> >
> > That was a bullet proof motor. Mine was, I'm not speaking for all of
them,
> > but I was told that it was a Pontiac design.
> >
> > Spdloader
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
> >
> > Okay, let me rephrase, if we're going to be technical.
> >
> > Ford with Ford,
> > Chevy with Chevy,
> > and Jeep with whatever the factory bought from somewhere else to put in
> > them.
> >
> > I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> > transmission.
> >
> > That was a bullet proof motor. Mine was, I'm not speaking for all of
them,
> > but I was told that it was a Pontiac design.
> >
> > Spdloader
Guest
Posts: n/a
Re: 1990 wrangler V8 swap question
So the F-head would have been the last "real Jeep" engine then?
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
> >
> > Okay, let me rephrase, if we're going to be technical.
> >
> > Ford with Ford,
> > Chevy with Chevy,
> > and Jeep with whatever the factory bought from somewhere else to put in
> > them.
> >
> > I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> > transmission.
> >
> > That was a bullet proof motor. Mine was, I'm not speaking for all of
them,
> > but I was told that it was a Pontiac design.
> >
> > Spdloader
Earle
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:443ACA5D.EAC180B7@***.net...
> The overhead cam Tornado was by Kaiser:
> http://www.----------.com/temp/tornadoOHCengine2.jpg
> http://www.----------.com/temp/tornadoOHCengine3.jpg Pontiac's design:
> http://www.pontiacheaven.org/images/...emp_cammer.jpg Both died as
> American wanted Real horsepower that only could be obtained via
> pushrods.
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Spdloader wrote:
> >
> > Okay, let me rephrase, if we're going to be technical.
> >
> > Ford with Ford,
> > Chevy with Chevy,
> > and Jeep with whatever the factory bought from somewhere else to put in
> > them.
> >
> > I had a '63 Wagoneer with the "Tornado 230" in it, and a two speed
> > transmission.
> >
> > That was a bullet proof motor. Mine was, I'm not speaking for all of
them,
> > but I was told that it was a Pontiac design.
> >
> > Spdloader