1952 Willys Jeep
08-24-2007, 11:51 PM
#11
Guest
Posts: n/a
Re: 1952 ****** Jeep
On Aug 24, 9:08 pm, Tyler Durden <tyler@adiposity_in_bags.net> wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
08-24-2007, 11:51 PM
#12
Guest
Posts: n/a
Re: 1952 ****** Jeep
On Aug 24, 9:08 pm, Tyler Durden <tyler@adiposity_in_bags.net> wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
08-24-2007, 11:51 PM
#13
Guest
Posts: n/a
Re: 1952 ****** Jeep
On Aug 24, 9:08 pm, Tyler Durden <tyler@adiposity_in_bags.net> wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg wrote:
> > Good evening all.
>
> > My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
> > the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
> > Paint is faded, but the body is pretty good. I am interested in buying
> > it from him. He wants to get $7500 for it. It starts and drives fine.
> > Can someone fill me in on these older Jeeps and tell me if his price
> > is way out of line. I am thinking of buying it and driving it on nice
> > sunny days. Any advice would be appreciated.
>
> > Thanks,
> > Greg
>
> Well, it always depends on a thousand things you can only guess at....!
>
> I did a very quick scan and found these ranging from (uh, no pun intended,
> sure) U$D5700 (beater needing work) and roving all the way up to U$D24500
> (perfect resto).
>
> The ones that seemed to be in the condition you're describing were all
> priced higher than your U$S7500, perhaps ~U$D9000 being the mean.
>
> You may find this site useful:
>
> http://www.******-mb.co.uk/jeep-for-sale.htm
>
> SW
Thanks for the info
08-25-2007, 11:03 AM
#14
Guest
Posts: n/a
Re: 1952 ****** Jeep
SnoMan;
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
08-25-2007, 11:03 AM
#15
Guest
Posts: n/a
Re: 1952 ****** Jeep
SnoMan;
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
08-25-2007, 11:03 AM
#16
Guest
Posts: n/a
Re: 1952 ****** Jeep
SnoMan;
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
08-25-2007, 11:03 AM
#17
Guest
Posts: n/a
Re: 1952 ****** Jeep
SnoMan;
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
apart I sent the starter in for service. Someone had converted it to key
start and all the old kick start parts are gone. The service station
threw away the electric start parts and now I have a problem.
No one seems to know how to rebuild the startes for key start anymore
and I can't find any information on the original starter parts.
Can you give me any information or even pictures of what I need and how
it is mounted on the jeep.
Dave Nagel
nagel.david,block@sbcglobal.net
(remove the comma-block)
SnoMan wrote:
> On Fri, 24 Aug 2007 18:32:42 -0700, jerryg <Gregginn7@msn.com> wrote:
>
>
>>Good evening all.
>>
>>My boss has a 1952 ****** Jeep for sale. 4 cyl. Manual. 3 sticks on
>>the floor. Jerry can. I believe Dana 44 front and rear. Newer top.
>>Paint is faded, but the body is pretty good. I am interested in buying
>>it from him. He wants to get $7500 for it. It starts and drives fine.
>>Can someone fill me in on these older Jeeps and tell me if his price
>>is way out of line. I am thinking of buying it and driving it on nice
>>sunny days. Any advice would be appreciated.
>>
>>Thanks,
>>Greg
>
>
> Well if it has dual D44's, it is not stock. It could have a D41 or D44
> in rear but up front it should have a D27. It should also have a T-90
> 3 speed and a Dana18 Tcase with a 2.42 low range. Engine should be a
> Hurrican 134 F head. (F does not stand for flat though as this engine
> had exhaust valve in block and intake in head and is easy to tell
> apart for the original 134 Go Devil flat head used until 1950) The
> Hurrican was rated at 72 HP. As far as price, if it is stock,
> complete, in good running order, not dented up and not rusted it could
> indeed be worth close to 7500. I tend to place much higher value on
> ones like this over ones that have been chopped up and modernized.
> Those old jeeps were extremely well built compared to todays models.
> -----------------
> TheSnoMan.com
08-25-2007, 12:02 PM
#18
Guest
Posts: n/a
Re: Re: 1952 ****** Jeep
On Sat, 25 Aug 2007 15:03:23 GMT, "David G. Nagel"
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
08-25-2007, 12:02 PM
#19
Guest
Posts: n/a
Re: Re: 1952 ****** Jeep
On Sat, 25 Aug 2007 15:03:23 GMT, "David G. Nagel"
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
08-25-2007, 12:02 PM
#20
Guest
Posts: n/a
Re: Re: 1952 ****** Jeep
On Sat, 25 Aug 2007 15:03:23 GMT, "David G. Nagel"
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
<nagel.david@sbcglobal.net> wrote:
>SnoMan;
>
>I have a 1951 CJ-2B. I had to rebuild the engine and while I had it
>apart I sent the starter in for service. Someone had converted it to key
>start and all the old kick start parts are gone. The service station
>threw away the electric start parts and now I have a problem.
>No one seems to know how to rebuild the startes for key start anymore
>and I can't find any information on the original starter parts.
>Can you give me any information or even pictures of what I need and how
>it is mounted on the jeep.
I have manuals here that go back to 59 on jeeps and covers both 134's.
It says it could have two starter styles. I do have access to even
older manuals. It would help if I had a picture of what we were
dealing with.
-----------------
TheSnoMan.com
