Jeep Liberty Forum KJ owners discuss the replacement of the Cherokee (still known as the Cherokee in European nations) - manufactured since 2002

DE-Carb and Mass Airflow Sensor clean instructions

Old Jan 11, 2012 | 09:54 AM
  #1  
zoomie's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 7
From: Niagara Falls Ontario
Default DE-Carb and Mass Airflow Sensor clean instructions

I did a search but didn't find what I want. If there is a faq I'd love a pointer.

I have a 2010 liberty with 60,000kms. Yesterday during an oilchange (I get them to do it in the winter) the dealer told me it's due for a "De-Carb" and MAS cleaning. They wanted $250. I think this is something I can do myself. Are there any instructions here?
Old Jan 18, 2012 | 12:29 PM
  #2  
zoomie's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 7
From: Niagara Falls Ontario
Default Re: DE-Carb and Mass Airflow Sensor clean instructions

I guess things are pretty slow around here.
Old Jan 22, 2012 | 10:10 PM
  #3  
LibertyTC's Avatar
Senior Member
 
Joined: Sep 2008
Posts: 116
From: Vancouver B.C.
Default Re: DE-Carb and Mass Airflow Sensor clean instructions

Ya the dealer want tons for lots of things but they do have the right equipment for the job.
A complete emission service can be done with professional correct chemicals, but ask if they also remove the throttle body for cleaning with it for $250.
Unless the vehicle is throwing CE (engine light codes) at only 36k miles it probably is not necessary.
AS long as the Jeep idles evenly (smooth no stumbles,even rpm) and you change the spark plugs every 30,000 km and recommend you use Chevron fuel with techron as it is an excellent engine/fuel system cleaner. A concentrate bottle of Techron http://www.chevron.com/products/cana...tives/tcp.aspx can be found at Chevron stations, possibly at some parts stores or Wall Mart, and can be added to a half a tank of fuel or two bottles to a full tank, with highway drives. (feel the power after it's clean) City driving does carbon up things! Get the jeep onto the highway more if you are all city driving.
The intake air control (controls idle) & ports as well as the Throttle position sensor & ports can be cleaned with throttle body spray cleaner to keep things in check. You can use the spray cleaner also inside the throttle body itself by removing the intake hose and move the throttle butterfly plate door open and get it clean in there as well. If you need more info on the IAC and TPS cleaning I can find another link send me a private message. Hope this helps. By the way I run Chevron 94 octane in winter because it does not contain ethanol (absorbs moisture) who needs water in gas anyways. The jeep does run better with non ethanol 94 octane Chevron fuels..ya it is more money but will reward ya with a cleaner fuel system & better mileage.

Last edited by LibertyTC; Jan 22, 2012 at 10:50 PM. Reason: change link on Techroline
Old Jan 24, 2012 | 10:42 AM
  #4  
zoomie's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 7
From: Niagara Falls Ontario
Default Re: DE-Carb and Mass Airflow Sensor clean instructions

Great feedback TC, Thanks.

It does shudder just a tiny bit at idle when cold. Nothing other than thats. I'll get a local garage to do the cleaning then change the plugs.

Cheers
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
raym
General Jeep and Tech Talk.
1
Apr 29, 2010 06:12 AM
Lon Stowell
Jeep Mailing List
3
Nov 9, 2007 05:17 PM
JD
Jeep Mailing List
0
Aug 11, 2004 10:34 AM
JD
Jeep Mailing List
16
Aug 9, 2004 05:43 PM
JD
Jeep Mailing List
8
Aug 5, 2004 11:02 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:33 AM.

Page generated in 0.07978 seconds with 12 queries