a3lover

Hi,

If you join the back upper lift to the right lower lift & weld them together then I am sure it will works properly. Make a try..

Thanks,

jeepmaster

Main problem with the swapping of 350 Chevy into the 80's cj5 is that the front drive line hits the lower passenger side of the pan, from front to back.
" lift on it and then modify the pan by cutting that side of the pan at a 45 to give room for the DL".
Lift the Jeep until you get adequate clearance, modify the pan if you need to hope so it may work to your problem but it is bit crappy and requires lots of time to do this............................:(:(:(:(:(