New Diffs for the Brute
8 Attachment(s)
Wow what a day.....great progress though!! We tackled the assembly of the new rear housing. The day started off pretty slow(from foggy brain syndrome) but once we got on a rooll all went very smoothly.Thanks to xtremexj, t2c2 and crazyYj we have the new BT9XD semi float rear housing is all but done and axles can be ordered for it on Monday!!
These are the same diff housings that Bear TraX 4x4 Outfitters Inc. will be selling out of the new shop!!! :D Some pics for ya Attachment 4552 Attachment 4553 Attachment 4554 Attachment 4555 Attachment 4556 Attachment 4557 Attachment 4558 Attachment 4559 |
Re: New Diffs for the Brute
Looks bulletproof.
Any close up pics of the welds? |
Re: New Diffs for the Brute
Originally Posted by RiponredTJ
(Post 540596)
Looks bulletproof.
Any close up pics of the welds? Can't wait to release them to the market!! Nope sorry we were to busy workin and weldin to think of that snapped a few as we went....will try maybe on the weekend, with running the shop my stuff is a weekend deal!!!! Bear |
Re: New Diffs for the Brute
Where are you going to be located at now Bear?
|
Re: New Diffs for the Brute
Originally Posted by 04WJGuy
(Post 540651)
Where are you going to be located at now Bear?
9182 Yellowhead Trail, Edmonton is where I am hangin my hat now. |
Re: New Diffs for the Brute
That's some serious lookin' hardware Bear.
|
Re: New Diffs for the Brute
7 Attachment(s)
t2c1 and I tackled the front doff today and got alot done. The pinion angle was set at an initial 9 degrees and then the inner c's were welded on with 8 degrees of castor. This should allow a bit of wiggle room for future adjustment in both pinion and castor angles without sacrificing return to center ability at the wheel.
Tommorrow we will finish putting the suspension bracketry on the housing and measure up for front axle shafts. Then on to the cosmetics with a healthy dose of grinding and painting. Thanx T for all the help.... Here are a few pics from the day!! Attachment 4498 [Attachment 4499 Attachment 4500 Attachment 4501 Attachment 4502 Attachment 4503 Attachment 4504 |
Re: New Diffs for the Brute
Whatever your planning on putting those under is going to be pretty heavy duty Bear!
|
Re: New Diffs for the Brute
WOW... thats all there is to say...
those things are monsters... what are you putting them under? |
Re: New Diffs for the Brute
1 Attachment(s)
Originally Posted by CrazyWJ242
(Post 541198)
WOW... thats all there is to say...
those things are monsters... what are you putting them under?
Originally Posted by 04WJGuy
(Post 541185)
Whatever your planning on putting those under is going to be pretty heavy duty Bear!
Attachment 4480 |
All times are GMT -4. The time now is 11:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands