How to get gauge cables through firewall?
Guest
Posts: n/a
How to get gauge cables through firewall?
I am adding a mechanical oil pressure and temperature gauge to a 1991
Cherokee 4L Auto. Is there an existing hole in the firewall to pass
the cables from the passenger to the engine compartment? If not, where
is the best place to drill a hole in the firewall? Thanks, in advance.
Cherokee 4L Auto. Is there an existing hole in the firewall to pass
the cables from the passenger to the engine compartment? If not, where
is the best place to drill a hole in the firewall? Thanks, in advance.
Guest
Posts: n/a
Re: How to get gauge cables through firewall?
Gary did pass the time by typing:
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
Guest
Posts: n/a
Re: How to get gauge cables through firewall?
Gary did pass the time by typing:
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
Guest
Posts: n/a
Re: How to get gauge cables through firewall?
Gary did pass the time by typing:
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
> I am adding a mechanical oil pressure and temperature gauge to a 1991
> Cherokee 4L Auto. Is there an existing hole in the firewall to pass
> the cables from the passenger to the engine compartment? If not, where
> is the best place to drill a hole in the firewall? Thanks, in advance.
Don't know your answer but the best method is to check
for other pass-throughs. Brake, gas, etc. all have rubber grommets
and usually there is enough room to thread another wire through.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
doughboyenator@gmail.com
Jeep Mailing List
4
May 9, 2007 05:16 AM
Charlie Dellacona
Jeep Mailing List
39
Oct 14, 2005 11:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)