Anyone got a CJ7 Steering shaft?
Guest
Posts: n/a
Anyone got a CJ7 Steering shaft?
My under hood steering shaft on my 86 CJ7 is getting really sloppy at
the lower u-joint and needs to get replaced.
I can get it rebuilt locally with greasable u-joints for about $175.00 I
think it is, but really don't have the cash right now.
Anyone in Canada or close to Ontario Canada have a used one that isn't
totally shot they would part with reasonably?
I'll trade an old 88 Cherokee for a new one. :-)
Thanks,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
the lower u-joint and needs to get replaced.
I can get it rebuilt locally with greasable u-joints for about $175.00 I
think it is, but really don't have the cash right now.
Anyone in Canada or close to Ontario Canada have a used one that isn't
totally shot they would part with reasonably?
I'll trade an old 88 Cherokee for a new one. :-)
Thanks,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Mike,
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Mike,
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Mike,
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Mike,
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
I replaced my factory steering shaft with a Borgeson. They're pricey ($240)
but it was a very noticeable improvement. I thought my steering box was
going bad because the steering was all over the place. Just by chance, I
replaced my steering shaft with a borgeson shaft and the Jeep drives
straight as an arrow now. I dont work for Borgeson, but I can tell you from
experience, it's a great product...and great customer service. my two
cents.
http://www.borgeson.com/TruckProductJeep.htm
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
> My under hood steering shaft on my 86 CJ7 is getting really sloppy at the
> lower u-joint and needs to get replaced.
>
> I can get it rebuilt locally with greasable u-joints for about $175.00 I
> think it is, but really don't have the cash right now.
>
> Anyone in Canada or close to Ontario Canada have a used one that isn't
> totally shot they would part with reasonably?
>
> I'll trade an old 88 Cherokee for a new one. :-)
>
> Thanks,
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
I haven't had 'any' income since last August so am looking for a cheap
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
I haven't had 'any' income since last August so am looking for a cheap
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
I haven't had 'any' income since last August so am looking for a cheap
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
I haven't had 'any' income since last August so am looking for a cheap
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
used one to get me by.
As mentioned, I can get mine rebuilt with grease fittings on the joints
for a couple hundred.
Mike
Anthony T wrote:
> Mike,
> I replaced my factory steering shaft with a Borgeson. They're pricey
> ($240) but it was a very noticeable improvement. I thought my steering
> box was going bad because the steering was all over the place. Just by
> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
> drives straight as an arrow now. I dont work for Borgeson, but I can
> tell you from experience, it's a great product...and great customer
> service. my two cents.
>
> http://www.borgeson.com/TruckProductJeep.htm
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>> the lower u-joint and needs to get replaced.
>>
>> I can get it rebuilt locally with greasable u-joints for about $175.00
>> I think it is, but really don't have the cash right now.
>>
>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>> totally shot they would part with reasonably?
>>
>> I'll trade an old 88 Cherokee for a new one. :-)
>>
>> Thanks,
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
Guest
Posts: n/a
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>
I understand. I hope you get some income soon.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com...
>I haven't had 'any' income since last August so am looking for a cheap used
>one to get me by.
>
> As mentioned, I can get mine rebuilt with grease fittings on the joints
> for a couple hundred.
>
> Mike
>
> Anthony T wrote:
>> Mike,
>> I replaced my factory steering shaft with a Borgeson. They're pricey
>> ($240) but it was a very noticeable improvement. I thought my steering
>> box was going bad because the steering was all over the place. Just by
>> chance, I replaced my steering shaft with a borgeson shaft and the Jeep
>> drives straight as an arrow now. I dont work for Borgeson, but I can
>> tell you from experience, it's a great product...and great customer
>> service. my two cents.
>>
>> http://www.borgeson.com/TruckProductJeep.htm
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com...
>>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at
>>> the lower u-joint and needs to get replaced.
>>>
>>> I can get it rebuilt locally with greasable u-joints for about $175.00 I
>>> think it is, but really don't have the cash right now.
>>>
>>> Anyone in Canada or close to Ontario Canada have a used one that isn't
>>> totally shot they would part with reasonably?
>>>
>>> I'll trade an old 88 Cherokee for a new one. :-)
>>>
>>> Thanks,
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>